Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
A 100 mm four-wire cable with black JST SH connectors on both ends

Adafruit

Adafruit STEMMA QT Qwiic JST SH 4-pin Cable 100mm

SKU CH-N4KC-0Z69A

A 100 mm JST SH cable with 4-pin connectors links STEMMA QT or Qwiic boards for sensor and driver connections

  • TypePrototyping Products
  • Connect sensors instantly with 100mm flexible cable
  • Secure 1mm pitch JST SH connectors lock firmly
  • Symmetrical design eliminates wrong-side insertion errors
  • Colour-coded wires simplify 3.3V power and I2C data routing
  • Ready for Qwiic boards and STEMMA QT devices

Connection Cable for Prototyping

This 100 mm cable links STEMMA QT and Qwiic boards using 4-pin JST SH connectors on both ends. The 1 mm pitch design keeps the assembly compact while maintaining a secure latch. Symmetrical wiring means either connector can attach to the sensor or the controller without orientation concerns.

Verify Board Headers Before Ordering

Confirm that both devices expose a 4-pin JST SH header with the standard pinout. The cable carries power, ground and I²C data lines in a fixed colour sequence. Mismatched pin assignments or a different pitch connector will prevent the link from functioning.

Colour-Coded Wires Simplify Wiring

Red, black, blue and yellow conductors map directly to 3.3 V power, ground, SDA and SCL respectively. This labelling removes guesswork when debugging the bus. No additional adapters or software are required to use the cable with compatible boards.

Punti di forza

  • Connect sensors instantly with 100mm flexible cable
  • Secure 1mm pitch JST SH connectors lock firmly
  • Symmetrical design eliminates wrong-side insertion errors
  • Colour-coded wires simplify 3.3V power and I2C data routing
  • Ready for Qwiic boards and STEMMA QT devices

Caratteristiche tecniche

TypePrototyping Products

Domande su questo articolo

What comes with the 100mm STEMMA QT cable and do I need any extra headers or boards?

The cable is a single 4-wire lead with JST-SH female connectors on both ends; no additional headers, boards or accessories are included.

How do I pick between the STEMMA QT and Qwiic ends on this cable?

Both connectors are identical JST-SH 4-pin plugs wired for 3.3 V power, ground, SDA and SCL, so either end can mate with any STEMMA QT or Qwiic port.

What do the 3.3 V power and I2C lines do once the cable is plugged into a microcontroller board?

Red carries 3.3 V supply, black is ground, blue carries I2C SDA data and yellow carries I2C SCL clock, letting the host talk to the attached sensor or driver.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.