Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Four chrome 90-degree compression fittings with G1/4 threads and rotatable bases

Alphacool

Alphacool Eiszapfen 13/10mm 90° Compression Fitting G1/4 Chrome 4-Pack

SKU CH-4PZX-3KA2J

A pack of four 90° rotatable chrome compression fittings with G1/4 threads for 13/10mm tubing

  • TypeFittings

Size 13/10mm

  • 90° angled design simplifies tight hose routing
  • Rotatable G1/4 thread enables 360° alignment flexibility
  • Chrome-coated brass resists chipping and peeling over time
  • High-flow construction supports efficient liquid circulation
  • Four-pack covers multiple loop connections in one set

Eiszapfen 90° Compression Fitting G1/4 Chrome

The Alphacool Eiszapfen series delivers high-end compression fittings for custom liquid-cooling loops. Each chrome-plated brass connector features a 90° angled body with a rotatable G1/4 thread for flexible routing. The pack contains four fittings designed for 13/10mm tubing with 3/8" ID and 1/2" OD dimensions.

Builders needing tight 90° turns

These fittings suit builders who need a 90° bend and 360° rotational freedom to avoid complex hose runs. The G1/4 thread matches 95% of water-cooling components. Buyers using tubing with different inner or outer diameters should look at other fitting sizes.

G1/4 thread with 13/10mm hose compatibility

The decisive specification is the G1/4 thread paired with 13/10mm (3/8" ID, 1/2" OD) hose sizing. This combination determines whether the fitting connects your existing components and tubing. Verify both thread and hose dimensions before purchasing.

Ciri-ciri utama

  • 90° angled design simplifies tight hose routing
  • Rotatable G1/4 thread enables 360° alignment flexibility
  • Chrome-coated brass resists chipping and peeling over time
  • High-flow construction supports efficient liquid circulation
  • Four-pack covers multiple loop connections in one set

Spesifikasi

TypeFittings

Versi lain model ini

1 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Will the 13/10mm hose size match the 3/8" ID tubing I already use in my loop?

Yes, the fitting is specified as 13/10mm which corresponds to 3/8" inner diameter and 1/2" outer diameter tubing, so it will connect directly to your existing hose.

How can I verify the 90° rotatable joint is seated correctly after installation?

The threaded side rotates 360°; after tightening the G1/4 thread you can turn the angled body to align the hose run, confirming free movement without resistance shows the joint is seated properly.

Does the four-pack include the compression rings for 13/10mm hose or must they be purchased separately?

The pack contains four complete 90° compression fittings with G1/4 threads, each supplied with its own compression ring for 13/10mm hose, so no extra parts are required.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.