Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four chrome 90-degree compression fittings with G1/4 threads and rotatable bases

Alphacool

Alphacool Eiszapfen 13/10mm 90° Compression Fitting G1/4 Chrome 4-Pack

SKU CH-4PZX-3KA2J

A pack of four 90° rotatable chrome compression fittings with G1/4 threads for 13/10mm tubing

  • TypeFittings

Size 13/10mm

  • 90° angled design simplifies tight hose routing
  • Rotatable G1/4 thread enables 360° alignment flexibility
  • Chrome-coated brass resists chipping and peeling over time
  • High-flow construction supports efficient liquid circulation
  • Four-pack covers multiple loop connections in one set

Eiszapfen 90° Compression Fitting G1/4 Chrome

The Alphacool Eiszapfen series delivers high-end compression fittings for custom liquid-cooling loops. Each chrome-plated brass connector features a 90° angled body with a rotatable G1/4 thread for flexible routing. The pack contains four fittings designed for 13/10mm tubing with 3/8" ID and 1/2" OD dimensions.

Builders needing tight 90° turns

These fittings suit builders who need a 90° bend and 360° rotational freedom to avoid complex hose runs. The G1/4 thread matches 95% of water-cooling components. Buyers using tubing with different inner or outer diameters should look at other fitting sizes.

G1/4 thread with 13/10mm hose compatibility

The decisive specification is the G1/4 thread paired with 13/10mm (3/8" ID, 1/2" OD) hose sizing. This combination determines whether the fitting connects your existing components and tubing. Verify both thread and hose dimensions before purchasing.

Puncte forte

  • 90° angled design simplifies tight hose routing
  • Rotatable G1/4 thread enables 360° alignment flexibility
  • Chrome-coated brass resists chipping and peeling over time
  • High-flow construction supports efficient liquid circulation
  • Four-pack covers multiple loop connections in one set

Specificații

TypeFittings

Alte versiuni ale acestui model

1 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 13/10mm hose size match the 3/8" ID tubing I already use in my loop?

Yes, the fitting is specified as 13/10mm which corresponds to 3/8" inner diameter and 1/2" outer diameter tubing, so it will connect directly to your existing hose.

How can I verify the 90° rotatable joint is seated correctly after installation?

The threaded side rotates 360°; after tightening the G1/4 thread you can turn the angled body to align the hose run, confirming free movement without resistance shows the joint is seated properly.

Does the four-pack include the compression rings for 13/10mm hose or must they be purchased separately?

The pack contains four complete 90° compression fittings with G1/4 threads, each supplied with its own compression ring for 13/10mm hose, so no extra parts are required.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.