Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four chrome 90-degree compression fittings with G1/4 threads and rotatable bases

Alphacool

Alphacool Eiszapfen 13/10mm 90° Compression Fitting G1/4 Chrome 4-Pack

SKU CH-4PZX-3KA2J

A pack of four 90° rotatable chrome compression fittings with G1/4 threads for 13/10mm tubing

  • TypeFittings

Size 13/10mm

  • 90° angled design simplifies tight hose routing
  • Rotatable G1/4 thread enables 360° alignment flexibility
  • Chrome-coated brass resists chipping and peeling over time
  • High-flow construction supports efficient liquid circulation
  • Four-pack covers multiple loop connections in one set

Eiszapfen 90° Compression Fitting G1/4 Chrome

The Alphacool Eiszapfen series delivers high-end compression fittings for custom liquid-cooling loops. Each chrome-plated brass connector features a 90° angled body with a rotatable G1/4 thread for flexible routing. The pack contains four fittings designed for 13/10mm tubing with 3/8" ID and 1/2" OD dimensions.

Builders needing tight 90° turns

These fittings suit builders who need a 90° bend and 360° rotational freedom to avoid complex hose runs. The G1/4 thread matches 95% of water-cooling components. Buyers using tubing with different inner or outer diameters should look at other fitting sizes.

G1/4 thread with 13/10mm hose compatibility

The decisive specification is the G1/4 thread paired with 13/10mm (3/8" ID, 1/2" OD) hose sizing. This combination determines whether the fitting connects your existing components and tubing. Verify both thread and hose dimensions before purchasing.

Prednosti

  • 90° angled design simplifies tight hose routing
  • Rotatable G1/4 thread enables 360° alignment flexibility
  • Chrome-coated brass resists chipping and peeling over time
  • High-flow construction supports efficient liquid circulation
  • Four-pack covers multiple loop connections in one set

Špecifikácie

TypeFittings

Ďalšie verzie tohto modelu

Ďalších 1 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 13/10mm hose size match the 3/8" ID tubing I already use in my loop?

Yes, the fitting is specified as 13/10mm which corresponds to 3/8" inner diameter and 1/2" outer diameter tubing, so it will connect directly to your existing hose.

How can I verify the 90° rotatable joint is seated correctly after installation?

The threaded side rotates 360°; after tightening the G1/4 thread you can turn the angled body to align the hose run, confirming free movement without resistance shows the joint is seated properly.

Does the four-pack include the compression rings for 13/10mm hose or must they be purchased separately?

The pack contains four complete 90° compression fittings with G1/4 threads, each supplied with its own compression ring for 13/10mm hose, so no extra parts are required.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.