bitmain
bitmain Antminer S19 95TH/s 3250W CA mining hardware
Bitcoin ASIC miner delivering 95 TH/s at 3250 W with included PSU, requires 220 V input
- High hashrate for Bitcoin mining at 95 TH/s
- Efficient power draw of 3250 W for lower operating cost
- 220 V input requirement ensures stable operation
- Includes PSU so no separate supply purchase needed
- Ready-to-mine ASIC saves setup time and effort
Purpose-built Bitcoin miner
This Bitmain Antminer S19 is an ASIC machine designed for Bitcoin mining and ships with a power supply included. It delivers a hash rate of 95 TH/s while drawing 3250 W from a 220 V circuit. The unit is sold new and intended for operators who can provide the required voltage and cooling.
Suitable for high-power sites.
The hardware suits facilities that can supply 220 V and handle a continuous 3250 W load with adequate heat removal. Buyers limited to 110 V circuits or without dedicated cooling infrastructure should look at other options. A 40 % restock fee applies within 30 days, so the purchase demands serious commitment.
Input voltage requirement
The single specification that decides fit is the mandatory 220 V input; incorrect voltage will likely damage the miner. Confirm your site delivers this voltage before ordering.
Ciri-ciri utama
- High hashrate for Bitcoin mining at 95 TH/s
- Efficient power draw of 3250 W for lower operating cost
- 220 V input requirement ensures stable operation
- Includes PSU so no separate supply purchase needed
- Ready-to-mine ASIC saves setup time and effort
Spesifikasi
Belum ada spesifikasi diterbitkan untuk produk ini.
Soalan tentang produk ini
Which version of the Antminer S19 should I choose if I see both 95TH/s and 110TH/s models?
This unit is the 95TH/s model with a 3250 W power draw and a required 220 V supply; the higher 110TH/s version is a different model with its own specifications.
What does the 95TH/s rating mean for daily operation?
The miner runs at 95 trillion hashes per second while drawing 3250 W continuously, so you need a 220 V circuit that can sustain that load and sufficient cooling to handle the heat output.
What power interface does the S19 use and what does it limit?
It requires a 220 V input; using a lower voltage can damage the hardware, and the 3250 W draw sets the minimum circuit capacity you must provide.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



