Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black plastic tray holding four 2.5 drives in one 5.25 bay

ICY DOCK

ICY DOCK MB344SP 4 x 2.5" to 5.25" hdd accessory

SKU CH-SR92-XRKD9 MPN MB344SP

Converts one 5.25" bay into four 2.5" SATA drive slots with tool-less mounting and open-frame cooling

  • ColorBlack
  • Conversion Tray1 x 5.25" Drive to 4 x 2.5" Bay
  • Mobile Rack Drives SupportMulti 2.5" Drives to 5.25" Bay
  • Protection CaseMultiple Drives
  • SpecificationsDrive Fit: 4 x 2.5” IDE/SATA HDD & SSD (7-9.5mm) Device Fit:
  • FeaturesFits 4 x 2.5” SATA HDD / SSD into a single 5.25” drive bay C

Model Brackets 4BAY

  • Fits four 2.5" SATA drives in one 5.25" bay
  • Tool-less installation with drive stabilizer secures each drive
  • Open frame design enables passive cooling for all drives
  • Supports 2.5" HDD or SSD from 7mm to 9.5mm height
  • Stackable rack option organises multiple drive kits together

Four drives in one bay

The ICY DOCK MB344SP adapter fits four 2.5 inch SATA hard drives or solid-state drives into a single external 5.25 inch drive bay. It accepts drives measuring 7mm to 9.5mm in height. The open frame design allows passive airflow across all installed drives. The unit can also serve as a stackable drive organising rack outside a chassis.

Tool-less install with stabiliser

Each drive slides into the tray and locks without screws using the tool-less mechanism. An advanced drive stabiliser system holds every drive firmly to prevent vibration or accidental ejection. The tray mounts into the 5.25 inch bay with the included screws. No special tools or drive caddies are required for the installation.

Check bay height and drive thickness

Verify that your chassis provides a standard external 5.25 inch half-height bay opening. Confirm that each 2.5 inch SATA drive you plan to install measures between 7mm and 9.5mm thick. Drives outside this height range will not fit the stabiliser slots. Ensure you have four SATA data and power cables long enough to reach the bay location.

Ciri-ciri utama

  • Fits four 2.5" SATA drives in one 5.25" bay
  • Tool-less installation with drive stabilizer secures each drive
  • Open frame design enables passive cooling for all drives
  • Supports 2.5" HDD or SSD from 7mm to 9.5mm height
  • Stackable rack option organises multiple drive kits together

Spesifikasi

BrandICY DOCK
ModelMB344SP
ColorBlack
Conversion Tray1 x 5.25" Drive to 4 x 2.5" Bay
Mobile Rack Drives SupportMulti 2.5" Drives to 5.25" Bay
Protection CaseMultiple Drives
SpecificationsDrive Fit: 4 x 2.5” IDE/SATA HDD & SSD (7-9.5mm)
Device Fit: 1 x 5.25" half height device bay
Material: Plastic
FeaturesFits 4 x 2.5” SATA HDD / SSD into a single 5.25” drive bay
Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height
Tool-less drive installation design with advanced drive stabilizer system
Compatible with any standard external 5.25” bay
Open frame design for maximum passive cooling
Can be used as a stackable drive organizing rack
Package ContentsDevice, User Manual, Screws
Berat penghantaran0.16 kg
Dimensi bungkusan163 × 157 × 56 mm

Versi lain model ini

4 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

How can I confirm the four drives are recognised after installing the MB344SP in a 5.25" bay?

Power on the system and check BIOS or Disk Management to see all four SATA drives listed; the open frame design keeps temperatures stable during the test.

What comes with the MB344SP and what must I provide myself?

The package includes the bracket, user manual and mounting screws; you must supply up to four 2.5" SATA drives (7 mm to 9.5 mm height) and SATA data and power cables.

Which drive heights does the MB344SP support for the four 2.5" bays?

It accepts any 2.5" SATA HDD or SSD from 7 mm up to 9.5 mm thick, so both slim and standard laptop drives fit without adapters.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.