Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two tiny ESP32-C3 boards each with a .42-inch OLED screen, ceramic antenna and USB-C connector

KEHIPI

KEHIPI 2PCS ESP32-C3 .42-inch OLED Development Board

SKU CH-PAD4-2G754

Tiny ESP32-C3 board with .42-inch OLED, ceramic antenna and 11 GPIO for IoT wearables

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Tiny OLED development board

The KEHIPI pack contains two ESP32-C3 super-mini boards each fitted with a 0.42-inch OLED display, a ceramic antenna and a USB-C connector for power and programming. The modules are based on the ESP32C3FN4/FH4 core with 4 MB flash and provide Wi-Fi and Bluetooth Low Energy connectivity for compact IoT designs.

Makers building wearable or battery-powered nodes

Developers who need a ready-to-use display and wireless stack in a very small footprint will benefit from the integrated screen and low-power modes. Projects that require more than eleven GPIO pins, additional hardware serial ports or a larger display area should consider a different form factor.

Eleven GPIO with PWM and four ADC channels

The board exposes eleven general-purpose pins that support PWM output and four analogue inputs alongside one I²C, one SPI and two UART interfaces, giving a fixed peripheral count that determines whether the board can drive the sensors and actuators your design requires.

Ciri-ciri utama

  • Compact 0.42-inch OLED screen gives instant visual feedback
  • Built-in ceramic antenna enables reliable 2.4 GHz Wi-Fi and Bluetooth connectivity
  • 11 GPIO pins with PWM plus I2C, SPI, UART and ADC cover diverse sensor needs
  • Low-power design with multiple sleep modes extends battery life for portable projects
  • Two boards in one pack simplify scaling IoT, wearable or smart-home prototypes

Spesifikasi

BrandAITRIP

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.