Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two green 204-pin DDR3 SODIMM modules in anti-static bag

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3-1333 SODIMM POSIFLEX XT-5515Pro JIVA memory upgrade

SKU CH-KGB2-F5X1T

8GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminals, 1333MHz CL9 non-ECC unbuffered modules

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB total capacity for smoother POS multitasking
  • DDR3-1333 speed keeps the XT-5515Pro responsive
  • 204-pin SODIMM form factor fits the terminal exactly
  • Non-ECC unbuffered design matches the system architecture
  • Two matched 4 GB modules enable dual-channel operation

Purpose-built POS upgrade

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets operators who need to expand memory in that specific fanless point-of-sale platform without guessing compatibility. Non-ECC unbuffered design matches the system requirements exactly.

Form factor and voltage

Each stick uses the 204-pin SODIMM layout with a 2Rx8 organisation and CL9 timing at 1333 MHz. The modules run at 1.50 V while the kit is also rated for 1.35 V operation, allowing them to fit the thermal envelope of the high-end fanless chassis. No heat spreader is present, keeping the profile low for tight internal clearance.

Ready-to-install kit

The package delivers a matched pair so both channels can be populated in one step, avoiding single-module bottlenecks. Chips come from major OEM sources such as Samsung, Micron or Hynix, and the kit carries a lifetime replacement warranty from the manufacturer. Installation follows the terminal’s own service manual and requires no additional software or configuration tools.

Ciri-ciri utama

  • 8 GB total capacity for smoother POS multitasking
  • DDR3-1333 speed keeps the XT-5515Pro responsive
  • 204-pin SODIMM form factor fits the terminal exactly
  • Non-ECC unbuffered design matches the system architecture
  • Two matched 4 GB modules enable dual-channel operation

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Soalan tentang produk ini

What speed does the DDR3 1333 (PC3-10600) interface actually run at in the POSIFLEX XT-5515Pro JIVA?

The modules operate at 1333 MHz with a PC3-10600 data rate, which is the maximum speed supported by this DDR3 SODIMM kit.

Will the 204-pin SODIMM modules fit the memory slots in the POSIFLEX XT-5515Pro JIVA terminal?

Yes, the kit uses standard 204-pin DDR3 SODIMM form factor designed for the POSIFLEX XT-5515Pro JIVA fanless POS terminal.

How do I install the two 4 GB sticks, and what is the common mistake to avoid?

Power off the terminal, open the memory compartment, insert each SODIMM at an angle until the clips click; the common mistake is not pressing firmly enough to seat both retention clips.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.