Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3-1333 SODIMM POSIFLEX XT-5515Pro JIVA memory upgrade

SKU CH-KGB2-F5X1T

8GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminals, 1333MHz CL9 non-ECC unbuffered modules

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB total capacity for smoother POS multitasking
  • DDR3-1333 speed keeps the XT-5515Pro responsive
  • 204-pin SODIMM form factor fits the terminal exactly
  • Non-ECC unbuffered design matches the system architecture
  • Two matched 4 GB modules enable dual-channel operation

Purpose-built POS upgrade

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets operators who need to expand memory in that specific fanless point-of-sale platform without guessing compatibility. Non-ECC unbuffered design matches the system requirements exactly.

Form factor and voltage

Each stick uses the 204-pin SODIMM layout with a 2Rx8 organisation and CL9 timing at 1333 MHz. The modules run at 1.50 V while the kit is also rated for 1.35 V operation, allowing them to fit the thermal envelope of the high-end fanless chassis. No heat spreader is present, keeping the profile low for tight internal clearance.

Ready-to-install kit

The package delivers a matched pair so both channels can be populated in one step, avoiding single-module bottlenecks. Chips come from major OEM sources such as Samsung, Micron or Hynix, and the kit carries a lifetime replacement warranty from the manufacturer. Installation follows the terminal’s own service manual and requires no additional software or configuration tools.

Punti di forza

  • 8 GB total capacity for smoother POS multitasking
  • DDR3-1333 speed keeps the XT-5515Pro responsive
  • 204-pin SODIMM form factor fits the terminal exactly
  • Non-ECC unbuffered design matches the system architecture
  • Two matched 4 GB modules enable dual-channel operation

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

Domande su questo articolo

What speed does the DDR3 1333 (PC3-10600) interface actually run at in the POSIFLEX XT-5515Pro JIVA?

The modules operate at 1333 MHz with a PC3-10600 data rate, which is the maximum speed supported by this DDR3 SODIMM kit.

Will the 204-pin SODIMM modules fit the memory slots in the POSIFLEX XT-5515Pro JIVA terminal?

Yes, the kit uses standard 204-pin DDR3 SODIMM form factor designed for the POSIFLEX XT-5515Pro JIVA fanless POS terminal.

How do I install the two 4 GB sticks, and what is the common mistake to avoid?

Power off the terminal, open the memory compartment, insert each SODIMM at an angle until the clips click; the common mistake is not pressing firmly enough to seat both retention clips.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.