저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Two green 204-pin DDR3 SODIMM modules in anti-static bag

NEMIX RAM

NEMIX RAM 8GB (2x4GB) DDR3-1333 SODIMM POSIFLEX XT-5515Pro JIVA memory upgrade

SKU CH-KGB2-F5X1T

8GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminals, 1333MHz CL9 non-ECC unbuffered modules

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8 GB total capacity for smoother POS multitasking
  • DDR3-1333 speed keeps the XT-5515Pro responsive
  • 204-pin SODIMM form factor fits the terminal exactly
  • Non-ECC unbuffered design matches the system architecture
  • Two matched 4 GB modules enable dual-channel operation

Purpose-built POS upgrade

This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets operators who need to expand memory in that specific fanless point-of-sale platform without guessing compatibility. Non-ECC unbuffered design matches the system requirements exactly.

Form factor and voltage

Each stick uses the 204-pin SODIMM layout with a 2Rx8 organisation and CL9 timing at 1333 MHz. The modules run at 1.50 V while the kit is also rated for 1.35 V operation, allowing them to fit the thermal envelope of the high-end fanless chassis. No heat spreader is present, keeping the profile low for tight internal clearance.

Ready-to-install kit

The package delivers a matched pair so both channels can be populated in one step, avoiding single-module bottlenecks. Chips come from major OEM sources such as Samsung, Micron or Hynix, and the kit carries a lifetime replacement warranty from the manufacturer. Installation follows the terminal’s own service manual and requires no additional software or configuration tools.

주요 특징

  • 8 GB total capacity for smoother POS multitasking
  • DDR3-1333 speed keeps the XT-5515Pro responsive
  • 204-pin SODIMM form factor fits the terminal exactly
  • Non-ECC unbuffered design matches the system architecture
  • Two matched 4 GB modules enable dual-channel operation

사양

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K2
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT

이 상품에 대한 질문

What speed does the DDR3 1333 (PC3-10600) interface actually run at in the POSIFLEX XT-5515Pro JIVA?

The modules operate at 1333 MHz with a PC3-10600 data rate, which is the maximum speed supported by this DDR3 SODIMM kit.

Will the 204-pin SODIMM modules fit the memory slots in the POSIFLEX XT-5515Pro JIVA terminal?

Yes, the kit uses standard 204-pin DDR3 SODIMM form factor designed for the POSIFLEX XT-5515Pro JIVA fanless POS terminal.

How do I install the two 4 GB sticks, and what is the common mistake to avoid?

Power off the terminal, open the memory compartment, insert each SODIMM at an angle until the clips click; the common mistake is not pressing firmly enough to seat both retention clips.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.