BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277761BTC
Skladom
NEMIX RAM
NEMIX RAM 8GB (2x4GB) DDR3-1333 SODIMM POSIFLEX XT-5515Pro JIVA memory upgrade
8GB DDR3 SODIMM kit for POSIFLEX XT-5515Pro JIVA terminals, 1333MHz CL9 non-ECC unbuffered modules
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8 GB total capacity for smoother POS multitasking
- DDR3-1333 speed keeps the XT-5515Pro responsive
- 204-pin SODIMM form factor fits the terminal exactly
- Non-ECC unbuffered design matches the system architecture
- Two matched 4 GB modules enable dual-channel operation
Purpose-built POS upgrade
This 8 GB kit contains two 4 GB DDR3 SODIMM modules built for the POSIFLEX XT-5515Pro JIVA terminal. It targets operators who need to expand memory in that specific fanless point-of-sale platform without guessing compatibility. Non-ECC unbuffered design matches the system requirements exactly.
Form factor and voltage
Each stick uses the 204-pin SODIMM layout with a 2Rx8 organisation and CL9 timing at 1333 MHz. The modules run at 1.50 V while the kit is also rated for 1.35 V operation, allowing them to fit the thermal envelope of the high-end fanless chassis. No heat spreader is present, keeping the profile low for tight internal clearance.
Ready-to-install kit
The package delivers a matched pair so both channels can be populated in one step, avoiding single-module bottlenecks. Chips come from major OEM sources such as Samsung, Micron or Hynix, and the kit carries a lifetime replacement warranty from the manufacturer. Installation follows the terminal’s own service manual and requires no additional software or configuration tools.
Prednosti
- 8 GB total capacity for smoother POS multitasking
- DDR3-1333 speed keeps the XT-5515Pro responsive
- 204-pin SODIMM form factor fits the terminal exactly
- Non-ECC unbuffered design matches the system architecture
- Two matched 4 GB modules enable dual-channel operation
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K2 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (2X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM KIT |
Otázky k tomuto produktu
What speed does the DDR3 1333 (PC3-10600) interface actually run at in the POSIFLEX XT-5515Pro JIVA?
The modules operate at 1333 MHz with a PC3-10600 data rate, which is the maximum speed supported by this DDR3 SODIMM kit.
Will the 204-pin SODIMM modules fit the memory slots in the POSIFLEX XT-5515Pro JIVA terminal?
Yes, the kit uses standard 204-pin DDR3 SODIMM form factor designed for the POSIFLEX XT-5515Pro JIVA fanless POS terminal.
How do I install the two 4 GB sticks, and what is the common mistake to avoid?
Power off the terminal, open the memory compartment, insert each SODIMM at an angle until the clips click; the common mistake is not pressing firmly enough to seat both retention clips.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
