Orico
Orico 1106SS-V1-BK-BP 3.5" to 5.25" SATA SSD accessory
Mounts a 3.5″ SATA drive in a 5.25″ bay with tool-free installation and hot-swap support
- ColorBlack
- Conversion Tray1 x 3.5" Drive to 5.25" Bay
- Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
- Mobile Rack InterfaceSATA I/II/III
- Protection CaseSingle Drive
- Compatible Products3.5"
Model 5.25 Trayless
- 5.25 Trayless
- 2.5 SSD SATA to 3.5 HDD Adapter
- 2.5 to 3.5 Drive Adapter Combo
- 2.5-inch HDD/SSD to 3.5-inch(D2S-6G)
Versi yang dicoret wujud, tetapi tidak tersedia di sini.
Option 1 Pack
- 1 Pack
- 2 Packs
- 5 Packs
Versi yang dicoret wujud, tetapi tidak tersedia di sini.
- Mount any 3.5" SATA drive in a 5.25" bay without capacity limits
- Tool-free locking installs a drive in seconds, no screws required
- Hot-swap support lets you change drives while the PC runs
- Stainless-steel frame dissipates heat and resists deformation
- Front power button switches between active and sleep modes
Front-access 3.5" drive bay
This adapter lets you install a single 3.5-inch SATA hard drive or SSD into a standard 5.25-inch front drive bay. It is aimed at PC builders and upgraders who want quick, tool-free access to a 3.5-inch drive without opening the case side panel. The unit supports SATA I, II and III interfaces with data rates up to 6 Gbps and has no stated capacity limit.
Upgrade from internal 3.5" bays
The tray replaces fixed internal 3.5-inch mount points by moving the drive to a front-accessible 5.25-inch bay. The jump is worthwhile when you need hot-swap capability to change drives while the system runs, or when your chassis lacks free internal 3.5-inch slots but has a spare 5.25-inch bay. A front power button lets you spin the drive down without removing it.
Check bay space and driver needs
Verify that your case has an available 5.25-inch external bay with enough depth for the caddy and that your motherboard or controller provides a free SATA port and power connector. Hot-swap operation requires installing the supplied driver on supported Windows versions from 98 through 10 and on macOS 10.2 and above; without the driver the drive will still function as a standard fixed SATA device.
Ciri-ciri utama
- Mount any 3.5" SATA drive in a 5.25" bay without capacity limits
- Tool-free locking installs a drive in seconds, no screws required
- Hot-swap support lets you change drives while the PC runs
- Stainless-steel frame dissipates heat and resists deformation
- Front power button switches between active and sleep modes
Spesifikasi
| Brand | ORICO |
|---|---|
| Color | Black |
| Conversion Tray | 1 x 3.5" Drive to 5.25" Bay |
| Mobile Rack Drives Support | 1 x 3.5" Drives to 5.25" Bay |
| Mobile Rack Interface | SATA I/II/III |
| Protection Case | Single Drive |
| Compatible Products | 3.5" |
| Berat penghantaran | 0.40 kg |
| Dimensi bungkusan | 203 × 163 × 46 mm |
Soalan tentang produk ini
Does the 1106SS-V1-BK-BP need a 5.25 inch bay and SATA cables?
It occupies one 5.25 inch front bay and connects with standard SATA data and power cables.
Is the drive screwed in or does it slide into the tray?
The drive locks into the tray without screws; the tray then slides into the bay and secures with a latch.
Will the front power switch or hot-swap function wear out?
The switch is rated for repeated use; hot-swap requires the supplied driver, and the SATA connector is designed for many insertion cycles.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
USD 0.82
0.00001049BTC
Ada stok