We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal tray converting a 3.5-inch drive bay to 5.25-inch with front power button

Orico

Orico 1106SS-V1-BK-BP 3.5" to 5.25" SATA SSD accessory

SKU CH-QQ77-X7KFW MPN 1106SS-V1-BK-BP

Mounts a 3.5″ SATA drive in a 5.25″ bay with tool-free installation and hot-swap support

  • ColorBlack
  • Conversion Tray1 x 3.5" Drive to 5.25" Bay
  • Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseSingle Drive
  • Compatible Products3.5"

Model 5.25 Trayless

  • 5.25 Trayless
  • 2.5 SSD SATA to 3.5 HDD Adapter
  • 2.5 to 3.5 Drive Adapter Combo
  • 2.5-inch HDD/SSD to 3.5-inch(D2S-6G)

Struck-through versions exist but are not stocked here.

Option 1 Pack

  • 1 Pack
  • 2 Packs
  • 5 Packs

Struck-through versions exist but are not stocked here.

  • Mount any 3.5" SATA drive in a 5.25" bay without capacity limits
  • Tool-free locking installs a drive in seconds, no screws required
  • Hot-swap support lets you change drives while the PC runs
  • Stainless-steel frame dissipates heat and resists deformation
  • Front power button switches between active and sleep modes

Front-access 3.5" drive bay

This adapter lets you install a single 3.5-inch SATA hard drive or SSD into a standard 5.25-inch front drive bay. It is aimed at PC builders and upgraders who want quick, tool-free access to a 3.5-inch drive without opening the case side panel. The unit supports SATA I, II and III interfaces with data rates up to 6 Gbps and has no stated capacity limit.

Upgrade from internal 3.5" bays

The tray replaces fixed internal 3.5-inch mount points by moving the drive to a front-accessible 5.25-inch bay. The jump is worthwhile when you need hot-swap capability to change drives while the system runs, or when your chassis lacks free internal 3.5-inch slots but has a spare 5.25-inch bay. A front power button lets you spin the drive down without removing it.

Check bay space and driver needs

Verify that your case has an available 5.25-inch external bay with enough depth for the caddy and that your motherboard or controller provides a free SATA port and power connector. Hot-swap operation requires installing the supplied driver on supported Windows versions from 98 through 10 and on macOS 10.2 and above; without the driver the drive will still function as a standard fixed SATA device.

Highlights

  • Mount any 3.5" SATA drive in a 5.25" bay without capacity limits
  • Tool-free locking installs a drive in seconds, no screws required
  • Hot-swap support lets you change drives while the PC runs
  • Stainless-steel frame dissipates heat and resists deformation
  • Front power button switches between active and sleep modes

Specifications

BrandORICO
ColorBlack
Conversion Tray1 x 3.5" Drive to 5.25" Bay
Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseSingle Drive
Compatible Products3.5"
Shipping weight0.40 kg
Package size203 × 163 × 46 mm

Questions about this item

Does the 1106SS-V1-BK-BP need a 5.25 inch bay and SATA cables?

It occupies one 5.25 inch front bay and connects with standard SATA data and power cables.

Is the drive screwed in or does it slide into the tray?

The drive locks into the tray without screws; the tray then slides into the bay and secures with a latch.

Will the front power switch or hot-swap function wear out?

The switch is rated for repeated use; hot-swap requires the supplied driver, and the SATA connector is designed for many insertion cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.