我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Black metal tray converting a 3.5-inch drive bay to 5.25-inch with front power button

Orico

Orico 1106SS-V1-BK-BP 3.5" to 5.25" SATA SSD accessory

SKU CH-QQ77-X7KFW MPN 1106SS-V1-BK-BP

Mounts a 3.5″ SATA drive in a 5.25″ bay with tool-free installation and hot-swap support

  • ColorBlack
  • Conversion Tray1 x 3.5" Drive to 5.25" Bay
  • Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseSingle Drive
  • Compatible Products3.5"

Model 5.25 Trayless

  • 5.25 Trayless
  • 2.5 SSD SATA to 3.5 HDD Adapter
  • 2.5 to 3.5 Drive Adapter Combo
  • 2.5-inch HDD/SSD to 3.5-inch(D2S-6G)

被劃上刪除線的選項確實存在，但本站並無供貨。

Option 1 Pack

  • 1 Pack
  • 2 Packs
  • 5 Packs

被劃上刪除線的選項確實存在，但本站並無供貨。

  • Mount any 3.5" SATA drive in a 5.25" bay without capacity limits
  • Tool-free locking installs a drive in seconds, no screws required
  • Hot-swap support lets you change drives while the PC runs
  • Stainless-steel frame dissipates heat and resists deformation
  • Front power button switches between active and sleep modes

Front-access 3.5" drive bay

This adapter lets you install a single 3.5-inch SATA hard drive or SSD into a standard 5.25-inch front drive bay. It is aimed at PC builders and upgraders who want quick, tool-free access to a 3.5-inch drive without opening the case side panel. The unit supports SATA I, II and III interfaces with data rates up to 6 Gbps and has no stated capacity limit.

Upgrade from internal 3.5" bays

The tray replaces fixed internal 3.5-inch mount points by moving the drive to a front-accessible 5.25-inch bay. The jump is worthwhile when you need hot-swap capability to change drives while the system runs, or when your chassis lacks free internal 3.5-inch slots but has a spare 5.25-inch bay. A front power button lets you spin the drive down without removing it.

Check bay space and driver needs

Verify that your case has an available 5.25-inch external bay with enough depth for the caddy and that your motherboard or controller provides a free SATA port and power connector. Hot-swap operation requires installing the supplied driver on supported Windows versions from 98 through 10 and on macOS 10.2 and above; without the driver the drive will still function as a standard fixed SATA device.

商品特色

  • Mount any 3.5" SATA drive in a 5.25" bay without capacity limits
  • Tool-free locking installs a drive in seconds, no screws required
  • Hot-swap support lets you change drives while the PC runs
  • Stainless-steel frame dissipates heat and resists deformation
  • Front power button switches between active and sleep modes

商品規格

BrandORICO
ColorBlack
Conversion Tray1 x 3.5" Drive to 5.25" Bay
Mobile Rack Drives Support1 x 3.5" Drives to 5.25" Bay
Mobile Rack InterfaceSATA I/II/III
Protection CaseSingle Drive
Compatible Products3.5"
出貨重量0.40 kg
包裝尺寸203 × 163 × 46 mm

商品問答

Does the 1106SS-V1-BK-BP need a 5.25 inch bay and SATA cables?

It occupies one 5.25 inch front bay and connects with standard SATA data and power cables.

Is the drive screwed in or does it slide into the tray?

The drive locks into the tray without screws; the tray then slides into the bay and secures with a latch.

Will the front power switch or hot-swap function wear out?

The switch is rated for repeated use; hot-swap requires the supplied driver, and the SATA connector is designed for many insertion cycles.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。