EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
OWC
16 GB DDR4 2666 ECC unbuffered VLP DIMM for workstations, servers and NAS systems
This 16GB DDR4 module runs at 2666 MT/s with CL19 latency and 1.2V operation. It targets workstations, servers and NAS systems that require error-correcting code memory. The unbuffered 2Rx8 design fits standard 288-pin desktop slots without registration overhead. JEDEC and ROHS compliance ensures a warranty-safe upgrade path.
Operating at the standard 1.2V keeps power draw low and heat output minimal during typical workloads. No heat spreader is fitted, so the VLP profile relies on case airflow for cooling. The low voltage and absence of LEDs contribute to quiet, efficient operation in densely populated DIMM banks.
The module ships as a single 16GB DIMM with no extra cables, brackets or software utilities. OWC validates every stick in-house to meet or exceed OEM specifications for the listed Hynix and Micron part numbers. A limited lifetime warranty and free technical support back the upgrade, but no installation media or monitoring tools are included.
| Brand | OWC |
|---|---|
| Part Number | 2E6V42R816GB |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
Power off the system, open the case, align the notch on the 288-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the module reports 16 GB at 2666 MT/s and ECC is enabled; the step most often missed is confirming ECC mode in firmware after the physical install.
No scheduled maintenance is required; keep interior dust-free and ensure the 1.2 V supply remains stable. If a correctable error count rises or the system logs uncorrectable ECC events, replace the module — otherwise it runs for the system life.
The JEDEC 1.2 V / CL19 timing ceiling is reached before thermal throttling; sustained write/read streams max out at the rated 2666 MT/s bandwidth, so throughput plateaus at the spec data rate rather than hitting a temperature wall.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?