OWC 2R9D42R464GB 64GB DDR4 2933MHz ECC RDIMM memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.
OWC
64 GB DDR4 ECC registered RDIMM at 2933 MHz CL21 1.2 V for Supermicro X11 server boards
This 64GB DDR4 ECC Registered RDIMM is designed for Supermicro motherboards X11DAC, X11DAi-N, X11DDW-L, X11DDW-NT and X11DGO-T. It serves administrators expanding memory in compatible workstation, server or NAS systems that require registered error-correcting modules.
The module uses a standard 288-pin DDR4 form factor without a heat spreader, operating at 1.2V with a 2Rx4 rank configuration. Its registered buffer adds electrical load on the memory controller, so it must be installed in platforms designed for registered DIMMs and cannot be mixed with unbuffered memory.
Verify that your motherboard is one of the five listed Supermicro models and that the BIOS supports DDR4 2933MHz operation with CL21 latency. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, but it will not function in standard desktop computers or any system requiring unbuffered non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DAC Supermicro Motherboard X11DAi-N Supermicro Motherboard X11DDW-L Supermicro Motherboard X11DDW-NT Supermicro Motherboard X11DGO-T |
Versi lain model ini
Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.
The module is rated for DDR4 2933 MT/s with a CL21 latency, corresponding to the PC4-23400 standard.
It uses a 288-pin DDR4 DIMM form factor and must be installed in a server or workstation motherboard that supports registered ECC memory.
Power down the system, align the notch with the slot key, and press firmly until the retention clips lock. Do not mix this registered ECC module with unbuffered memory.
Juga di rak ini
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.
Apa yang anda hantar untuk membayar, dan mata wang yang anda guna untuk membaca harga.
Dihantar daripada dompet anda semasa semak keluar
Untuk paparan sahaja — katalog diberi harga dalam USD
Tiada mata wang yang sepadan.
Pilih bahasa yang digunakan oleh laman web ini.
Tiada bahasa yang sepadan.
Pengguna baharu?
Sudah mempunyai akaun?
Tiada set semula automatik: kedai ini tidak menghantar sebarang e-mel, jadi tiada pautan sekali guna untuk diminta. Biarkan alamat pada akaun tersebut, ia akan diuruskan secara manual.
Permintaan direkodkan
Tiada apa-apa akan sampai ke peti masuk anda — kedai ini tidak menghantar sebarang e-mel. Seseorang akan menguruskannya secara manual.
Sudah teringat?