OWC 2R9D42R464GB 64GB DDR4 2933MHz ECC RDIMM memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
OWC
64 GB DDR4 ECC registered RDIMM at 2933 MHz CL21 1.2 V for Supermicro X11 server boards
This 64GB DDR4 ECC Registered RDIMM is designed for Supermicro motherboards X11DAC, X11DAi-N, X11DDW-L, X11DDW-NT and X11DGO-T. It serves administrators expanding memory in compatible workstation, server or NAS systems that require registered error-correcting modules.
The module uses a standard 288-pin DDR4 form factor without a heat spreader, operating at 1.2V with a 2Rx4 rank configuration. Its registered buffer adds electrical load on the memory controller, so it must be installed in platforms designed for registered DIMMs and cannot be mixed with unbuffered memory.
Verify that your motherboard is one of the five listed Supermicro models and that the BIOS supports DDR4 2933MHz operation with CL21 latency. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, but it will not function in standard desktop computers or any system requiring unbuffered non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DAC Supermicro Motherboard X11DAi-N Supermicro Motherboard X11DDW-L Supermicro Motherboard X11DDW-NT Supermicro Motherboard X11DGO-T |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
The module is rated for DDR4 2933 MT/s with a CL21 latency, corresponding to the PC4-23400 standard.
It uses a 288-pin DDR4 DIMM form factor and must be installed in a server or workstation motherboard that supports registered ECC memory.
Power down the system, align the notch with the slot key, and press firmly until the retention clips lock. Do not mix this registered ECC module with unbuffered memory.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?