暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 288-pin DDR4 ECC registered RDIMM module, no heat spreader

OWC

OWC 64GB DDR4 2933MHz ECC Registered RDIMM 2Rx4 CL21 1.2V 288pin Server Memory Upgrade

SKU CH-C322-GPFF5

64 GB DDR4 ECC registered RDIMM at 2933 MHz CL21 1.2 V for Supermicro X11 server boards

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 64GB

  • 64 GB capacity handles heavy server workloads
  • ECC registered design protects data integrity in critical systems
  • DDR4 2933 MHz CL21 delivers responsive throughput
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X11DAC X11DAi-N X11DDW-L X11DDW-NT X11DGO-T

Target Server Platforms

This 64GB DDR4 ECC Registered RDIMM is designed for Supermicro motherboards X11DAC, X11DAi-N, X11DDW-L, X11DDW-NT and X11DGO-T. It serves administrators expanding memory in compatible workstation, server or NAS systems that require registered error-correcting modules.

Physical Build and Daily Use

The module uses a standard 288-pin DDR4 form factor without a heat spreader, operating at 1.2V with a 2Rx4 rank configuration. Its registered buffer adds electrical load on the memory controller, so it must be installed in platforms designed for registered DIMMs and cannot be mixed with unbuffered memory.

Pre-Installation Checks

Verify that your motherboard is one of the five listed Supermicro models and that the BIOS supports DDR4 2933MHz operation with CL21 latency. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, but it will not function in standard desktop computers or any system requiring unbuffered non-ECC memory.

特長

  • 64 GB capacity handles heavy server workloads
  • ECC registered design protects data integrity in critical systems
  • DDR4 2933 MHz CL21 delivers responsive throughput
  • 2 V operation reduces power draw per module
  • Validated for Supermicro X11DAC X11DAi-N X11DDW-L X11DDW-NT X11DGO-T

仕様

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DAC
Supermicro Motherboard X11DAi-N
Supermicro Motherboard X11DDW-L
Supermicro Motherboard X11DDW-NT
Supermicro Motherboard X11DGO-T

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR4 speed and CAS latency does this module run at?

The module is rated for DDR4 2933 MT/s with a CL21 latency, corresponding to the PC4-23400 standard.

What physical slot and form factor does this 64 GB RDIMM require?

It uses a 288-pin DDR4 DIMM form factor and must be installed in a server or workstation motherboard that supports registered ECC memory.

How is this memory installed and what common mistake should be avoided?

Power down the system, align the notch with the slot key, and press firmly until the retention clips lock. Do not mix this registered ECC module with unbuffered memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。