OWC 2R9D42R464GB 64GB DDR4 2933MHz ECC RDIMM memory upgrade
- 64GB
- 288-Pin DDR4 ECC RD…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
64 GB DDR4 ECC registered RDIMM at 2933 MHz CL21 1.2 V for Supermicro X11 server boards
This 64GB DDR4 ECC Registered RDIMM is designed for Supermicro motherboards X11DAC, X11DAi-N, X11DDW-L, X11DDW-NT and X11DGO-T. It serves administrators expanding memory in compatible workstation, server or NAS systems that require registered error-correcting modules.
The module uses a standard 288-pin DDR4 form factor without a heat spreader, operating at 1.2V with a 2Rx4 rank configuration. Its registered buffer adds electrical load on the memory controller, so it must be installed in platforms designed for registered DIMMs and cannot be mixed with unbuffered memory.
Verify that your motherboard is one of the five listed Supermicro models and that the BIOS supports DDR4 2933MHz operation with CL21 latency. The module is backward compatible with 2133MHz, 2400MHz and 2666MHz speeds, but it will not function in standard desktop computers or any system requiring unbuffered non-ECC memory.
| Brand | OWC |
|---|---|
| Part Number | 2R9D42R464GB |
| Capacity | 64GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
| Compatible System | Supermicro Motherboard X11DAC Supermicro Motherboard X11DAi-N Supermicro Motherboard X11DDW-L Supermicro Motherboard X11DDW-NT Supermicro Motherboard X11DGO-T |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The module is rated for DDR4 2933 MT/s with a CL21 latency, corresponding to the PC4-23400 standard.
It uses a 288-pin DDR4 DIMM form factor and must be installed in a server or workstation motherboard that supports registered ECC memory.
Power down the system, align the notch with the slot key, and press firmly until the retention clips lock. Do not mix this registered ECC module with unbuffered memory.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?