Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

SAMSUNG

SAMSUNG 8GB kit (2 x 4GB) DDR3 PC3-12800 240-pin DIMM desktop RAM

SKU CH-BT75-GE30Y

Dual-channel 8 GB DDR3 kit with two 240-pin DIMMs at 1600 MT/s, CL11, 1.5 V, unbuffered non-ECC

  • 8GB kit expands desktop capacity with two 4GB modules
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive multitasking
  • CL11 timing reduces latency for smoother application performance
  • 5V operation lowers power draw and heat output
  • 240-pin unbuffered non-ECC design fits standard desktop DIMM slots

Kit overview

This Samsung kit supplies 8 GB of DDR3 desktop memory in two 4 GB modules. Each stick is a 240-pin DIMM rated at PC3-12800 with a CAS latency of 11. The modules run at 1.5 V and are unbuffered, non-ECC parts. They are intended for standard desktop systems that accept DDR3 DIMMs.

Who this suits

Builders upgrading or repairing a desktop that uses DDR3 memory and has slots able to accept 4 GB per module will find this kit a direct fit. The dual-channel pair delivers 8 GB total capacity for everyday office and home workloads. Buyers who need more than 8 GB of system memory or who require ECC error correction should look at other options. Systems limited to lower per-slot capacities or different memory types cannot use these modules.

Deciding spec

The critical specification is the DDR3 PC3-12800 rating combined with the 240-pin DIMM form factor. Your motherboard must support DDR3 at 1600 MT/s and accept 240-pin unbuffered non-ECC DIMMs with a 4 GB per slot limit. If the board calls for a different voltage, pin count, or memory standard, this kit will not be compatible.

Ciri-ciri utama

  • 8GB kit expands desktop capacity with two 4GB modules
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive multitasking
  • CL11 timing reduces latency for smoother application performance
  • 5V operation lowers power draw and heat output
  • 240-pin unbuffered non-ECC design fits standard desktop DIMM slots

Spesifikasi

BrandSAMSUNG

Soalan tentang produk ini

Does my motherboard need to support 4 GB per DIMM slot for this 2 x 4 GB kit to work?

The kit uses 4 GB modules, so the board must accept at least 4 GB per slot; check the motherboard manual for the maximum capacity per DIMM.

Will this DDR3-1600 kit run at its rated speed if I keep slower DDR3 modules installed?

All installed memory usually runs at the speed of the slowest module; the kit is rated at DDR3-1600 with CL11, so mixing slower sticks will drop the whole system to that lower speed.

How can I confirm the kit is operating at DDR3-1600 with CL11 after installation?

Open the BIOS or a tool such as CPU-Z and verify the memory frequency shows 800 MHz (DDR3-1600) and the CAS latency reads 11.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.