暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

SAMSUNG

SAMSUNG 8GB kit (2 x 4GB) DDR3 PC3-12800 240-pin DIMM desktop RAM

SKU CH-BT75-GE30Y

Dual-channel 8 GB DDR3 kit with two 240-pin DIMMs at 1600 MT/s, CL11, 1.5 V, unbuffered non-ECC

  • 8GB kit expands desktop capacity with two 4GB modules
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive multitasking
  • CL11 timing reduces latency for smoother application performance
  • 5V operation lowers power draw and heat output
  • 240-pin unbuffered non-ECC design fits standard desktop DIMM slots

Kit overview

This Samsung kit supplies 8 GB of DDR3 desktop memory in two 4 GB modules. Each stick is a 240-pin DIMM rated at PC3-12800 with a CAS latency of 11. The modules run at 1.5 V and are unbuffered, non-ECC parts. They are intended for standard desktop systems that accept DDR3 DIMMs.

Who this suits

Builders upgrading or repairing a desktop that uses DDR3 memory and has slots able to accept 4 GB per module will find this kit a direct fit. The dual-channel pair delivers 8 GB total capacity for everyday office and home workloads. Buyers who need more than 8 GB of system memory or who require ECC error correction should look at other options. Systems limited to lower per-slot capacities or different memory types cannot use these modules.

Deciding spec

The critical specification is the DDR3 PC3-12800 rating combined with the 240-pin DIMM form factor. Your motherboard must support DDR3 at 1600 MT/s and accept 240-pin unbuffered non-ECC DIMMs with a 4 GB per slot limit. If the board calls for a different voltage, pin count, or memory standard, this kit will not be compatible.

特長

  • 8GB kit expands desktop capacity with two 4GB modules
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive multitasking
  • CL11 timing reduces latency for smoother application performance
  • 5V operation lowers power draw and heat output
  • 240-pin unbuffered non-ECC design fits standard desktop DIMM slots

仕様

BrandSAMSUNG

この商品に関する質問

Does my motherboard need to support 4 GB per DIMM slot for this 2 x 4 GB kit to work?

The kit uses 4 GB modules, so the board must accept at least 4 GB per slot; check the motherboard manual for the maximum capacity per DIMM.

Will this DDR3-1600 kit run at its rated speed if I keep slower DDR3 modules installed?

All installed memory usually runs at the speed of the slowest module; the kit is rated at DDR3-1600 with CL11, so mixing slower sticks will drop the whole system to that lower speed.

How can I confirm the kit is operating at DDR3-1600 with CL11 after installation?

Open the BIOS or a tool such as CPU-Z and verify the memory frequency shows 800 MHz (DDR3-1600) and the CAS latency reads 11.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。