Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green Samsung DDR3 DIMMs with gold contacts

SAMSUNG

SAMSUNG 8GB kit (2 x 4GB) DDR3 PC3-12800 240-pin DIMM desktop RAM

SKU CH-BT75-GE30Y

Dual-channel 8 GB DDR3 kit with two 240-pin DIMMs at 1600 MT/s, CL11, 1.5 V, unbuffered non-ECC

  • 8GB kit expands desktop capacity with two 4GB modules
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive multitasking
  • CL11 timing reduces latency for smoother application performance
  • 5V operation lowers power draw and heat output
  • 240-pin unbuffered non-ECC design fits standard desktop DIMM slots

Kit overview

This Samsung kit supplies 8 GB of DDR3 desktop memory in two 4 GB modules. Each stick is a 240-pin DIMM rated at PC3-12800 with a CAS latency of 11. The modules run at 1.5 V and are unbuffered, non-ECC parts. They are intended for standard desktop systems that accept DDR3 DIMMs.

Who this suits

Builders upgrading or repairing a desktop that uses DDR3 memory and has slots able to accept 4 GB per module will find this kit a direct fit. The dual-channel pair delivers 8 GB total capacity for everyday office and home workloads. Buyers who need more than 8 GB of system memory or who require ECC error correction should look at other options. Systems limited to lower per-slot capacities or different memory types cannot use these modules.

Deciding spec

The critical specification is the DDR3 PC3-12800 rating combined with the 240-pin DIMM form factor. Your motherboard must support DDR3 at 1600 MT/s and accept 240-pin unbuffered non-ECC DIMMs with a 4 GB per slot limit. If the board calls for a different voltage, pin count, or memory standard, this kit will not be compatible.

Puncte forte

  • 8GB kit expands desktop capacity with two 4GB modules
  • DDR3-1600 speed delivers 12800 MB/s bandwidth for responsive multitasking
  • CL11 timing reduces latency for smoother application performance
  • 5V operation lowers power draw and heat output
  • 240-pin unbuffered non-ECC design fits standard desktop DIMM slots

Specificații

BrandSAMSUNG

Întrebări despre acest articol

Does my motherboard need to support 4 GB per DIMM slot for this 2 x 4 GB kit to work?

The kit uses 4 GB modules, so the board must accept at least 4 GB per slot; check the motherboard manual for the maximum capacity per DIMM.

Will this DDR3-1600 kit run at its rated speed if I keep slower DDR3 modules installed?

All installed memory usually runs at the speed of the slowest module; the kit is rated at DDR3-1600 with CL11, so mixing slower sticks will drop the whole system to that lower speed.

How can I confirm the kit is operating at DDR3-1600 with CL11 after installation?

Open the BIOS or a tool such as CPU-Z and verify the memory frequency shows 800 MHz (DDR3-1600) and the CAS latency reads 11.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.