Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Two black 120mm PWM case fans with metal-reinforced hubs and hydraulic bearings

Thermaltake

Thermaltake ToughFan 12 120mm PWM case fan 2-pack 500-2000 RPM CL-F082-PL12BL-A

SKU CH-G9RN-3GHBV MPN CL-F082-PL12BL-A

Two 120 mm PWM fans deliver up to 2000 RPM and 58.35 CFM at 22.3 dBA for case or radiator cooling

  • Fan Counts2 Fans
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing Gen.2

Color Black

Model 2000 RPM

Option 2 Packs, 120mm

  • PWM range from 500 to 2000 RPM gives precise speed control
  • 35 CFM airflow pushes heat through radiators and tight cases
  • 3 dBA noise level keeps the system quiet under load
  • Gen.2 hydraulic bearing with etched shaft retains lubricant for longer life
  • Steel motor hub adds rigidity and reduces vibration at high speed

Two-pack 120 mm PWM fans

Two 120 mm case fans with 4-pin PWM control and a speed range of 500 to 2000 RPM. They deliver 58.35 CFM airflow at a maximum noise level of 22.3 dBA. Gen.2 hydraulic bearings and metal-reinforced motor hubs aim to reduce vibration and extend lifespan. Liquid-crystal-polymer blades keep deformation low at full speed.

Suited for radiators and tight case layouts

The high static pressure design fits radiators or restrictive front panels where airflow resistance is high. Builders who prefer direct fan-header control without extra hubs will find the 4-pin connector simple. Buyers who want RGB lighting or a bundled controller should look elsewhere. Systems needing speeds below 500 RPM cannot use the standard PWM curve.

25 mm thick frame fits standard 120 mm mounts

The 25 mm thickness matches typical case and radiator screw holes without clearance issues. All other dimensions and performance figures follow from this single form factor.

Ciri-ciri utama

  • PWM range from 500 to 2000 RPM gives precise speed control
  • 35 CFM airflow pushes heat through radiators and tight cases
  • 3 dBA noise level keeps the system quiet under load
  • Gen.2 hydraulic bearing with etched shaft retains lubricant for longer life
  • Steel motor hub adds rigidity and reduces vibration at high speed

Spesifikasi

BrandThermaltake
SeriesToughFan 12 (2 pack)
ModelCL-F082-PL12BL-A
Fan Counts2 Fans
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic Bearing Gen.2
RPMPWM 500 - 2000 R.P.M
With L.N.C PWM 500 - 1500 R.P.M
Air Flow58.35 CFM
Noise Level22.3 dBA
Power Connector4 Pin
ColorBlack
FeaturesUnparalleled Cooling Performance
Exceptional Blade Design
Metal-Reinforced Motor Hub
The 2nd Generation Hydraulic Bearing
Designed for All Cooling Applications
Dimensions120 x 120 x 25 mm
Berat penghantaran0.59 kg
Dimensi bungkusan191 × 140 × 61 mm

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What clearance does the 120 mm by 25 mm frame need in my case?

Each fan measures 120 mm square and 25 mm thick, so allow at least 25 mm depth behind any 120 mm mounting holes.

How do I connect the 4-pin PWM cable and what L.N.C. limit should I set?

Plug the 4-pin connector into a motherboard PWM header; in BIOS enable L.N.C. mode to cap speed at 1500 RPM instead of the 2000 RPM maximum.

When will the Gen.2 hydraulic bearing need lubrication or replacement?

The second-generation hydraulic bearing seals lubricant on both sides of the shaft, so no user lubrication is required; replace only if noise exceeds 22.3 dBA or RPM drops below 500.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.