Thermaltake ToughFan 12 Turquoise 2000 PWM 120mm case fan CL-F117-PL12TQ-A
- 1 Fan
- No Controller
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Thermaltake
Two 120 mm PWM fans deliver up to 2000 RPM and 58.35 CFM at 22.3 dBA for case or radiator cooling
Model 2000 RPM
Option 2 Packs, 120mm
Two 120 mm case fans with 4-pin PWM control and a speed range of 500 to 2000 RPM. They deliver 58.35 CFM airflow at a maximum noise level of 22.3 dBA. Gen.2 hydraulic bearings and metal-reinforced motor hubs aim to reduce vibration and extend lifespan. Liquid-crystal-polymer blades keep deformation low at full speed.
The high static pressure design fits radiators or restrictive front panels where airflow resistance is high. Builders who prefer direct fan-header control without extra hubs will find the 4-pin connector simple. Buyers who want RGB lighting or a bundled controller should look elsewhere. Systems needing speeds below 500 RPM cannot use the standard PWM curve.
The 25 mm thickness matches typical case and radiator screw holes without clearance issues. All other dimensions and performance figures follow from this single form factor.
| Brand | Thermaltake |
|---|---|
| Series | ToughFan 12 (2 pack) |
| Model | CL-F082-PL12BL-A |
| Fan Counts | 2 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing Gen.2 |
| RPM | PWM 500 - 2000 R.P.M With L.N.C PWM 500 - 1500 R.P.M |
| Air Flow | 58.35 CFM |
| Noise Level | 22.3 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| Features | Unparalleled Cooling Performance Exceptional Blade Design Metal-Reinforced Motor Hub The 2nd Generation Hydraulic Bearing Designed for All Cooling Applications |
| Dimensions | 120 x 120 x 25 mm |
| وزن الشحنة | 0.59 kg |
| أبعاد الطرد | 191 × 140 × 61 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Each fan measures 120 mm square and 25 mm thick, so allow at least 25 mm depth behind any 120 mm mounting holes.
Plug the 4-pin connector into a motherboard PWM header; in BIOS enable L.N.C. mode to cap speed at 1500 RPM instead of the 2000 RPM maximum.
The second-generation hydraulic bearing seals lubricant on both sides of the shaft, so no user lubrication is required; replace only if noise exceeds 22.3 dBA or RPM drops below 500.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟