Thermaltake ToughFan 12 Turquoise 2000 PWM 120mm case fan CL-F117-PL12TQ-A
- 1 Fan
- No Controller
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Thermaltake
Two 120 mm PWM fans deliver up to 2000 RPM and 58.35 CFM at 22.3 dBA for case or radiator cooling
Model 2000 RPM
Option 2 Packs, 120mm
Two 120 mm case fans with 4-pin PWM control and a speed range of 500 to 2000 RPM. They deliver 58.35 CFM airflow at a maximum noise level of 22.3 dBA. Gen.2 hydraulic bearings and metal-reinforced motor hubs aim to reduce vibration and extend lifespan. Liquid-crystal-polymer blades keep deformation low at full speed.
The high static pressure design fits radiators or restrictive front panels where airflow resistance is high. Builders who prefer direct fan-header control without extra hubs will find the 4-pin connector simple. Buyers who want RGB lighting or a bundled controller should look elsewhere. Systems needing speeds below 500 RPM cannot use the standard PWM curve.
The 25 mm thickness matches typical case and radiator screw holes without clearance issues. All other dimensions and performance figures follow from this single form factor.
| Brand | Thermaltake |
|---|---|
| Series | ToughFan 12 (2 pack) |
| Model | CL-F082-PL12BL-A |
| Fan Counts | 2 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing Gen.2 |
| RPM | PWM 500 - 2000 R.P.M With L.N.C PWM 500 - 1500 R.P.M |
| Air Flow | 58.35 CFM |
| Noise Level | 22.3 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| Features | Unparalleled Cooling Performance Exceptional Blade Design Metal-Reinforced Motor Hub The 2nd Generation Hydraulic Bearing Designed for All Cooling Applications |
| Dimensions | 120 x 120 x 25 mm |
| Verzendgewicht | 0.59 kg |
| Pakketafmetingen | 191 × 140 × 61 mm |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Each fan measures 120 mm square and 25 mm thick, so allow at least 25 mm depth behind any 120 mm mounting holes.
Plug the 4-pin connector into a motherboard PWM header; in BIOS enable L.N.C. mode to cap speed at 1500 RPM instead of the 2000 RPM maximum.
The second-generation hydraulic bearing seals lubricant on both sides of the shaft, so no user lubrication is required; replace only if noise exceeds 22.3 dBA or RPM drops below 500.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Geen taal gevonden.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?