Thermaltake ToughFan 12 Turquoise 2000 PWM 120mm case fan CL-F117-PL12TQ-A
- 1 Fan
- No Controller
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Thermaltake
Two 120 mm PWM fans deliver up to 2000 RPM and 58.35 CFM at 22.3 dBA for case or radiator cooling
Model 2000 RPM
Option 2 Packs, 120mm
Two 120 mm case fans with 4-pin PWM control and a speed range of 500 to 2000 RPM. They deliver 58.35 CFM airflow at a maximum noise level of 22.3 dBA. Gen.2 hydraulic bearings and metal-reinforced motor hubs aim to reduce vibration and extend lifespan. Liquid-crystal-polymer blades keep deformation low at full speed.
The high static pressure design fits radiators or restrictive front panels where airflow resistance is high. Builders who prefer direct fan-header control without extra hubs will find the 4-pin connector simple. Buyers who want RGB lighting or a bundled controller should look elsewhere. Systems needing speeds below 500 RPM cannot use the standard PWM curve.
The 25 mm thickness matches typical case and radiator screw holes without clearance issues. All other dimensions and performance figures follow from this single form factor.
| Brand | Thermaltake |
|---|---|
| Series | ToughFan 12 (2 pack) |
| Model | CL-F082-PL12BL-A |
| Fan Counts | 2 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydraulic Bearing Gen.2 |
| RPM | PWM 500 - 2000 R.P.M With L.N.C PWM 500 - 1500 R.P.M |
| Air Flow | 58.35 CFM |
| Noise Level | 22.3 dBA |
| Power Connector | 4 Pin |
| Color | Black |
| Features | Unparalleled Cooling Performance Exceptional Blade Design Metal-Reinforced Motor Hub The 2nd Generation Hydraulic Bearing Designed for All Cooling Applications |
| Dimensions | 120 x 120 x 25 mm |
| Lähetyspaino | 0.59 kg |
| Pakkauksen mitat | 191 × 140 × 61 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each fan measures 120 mm square and 25 mm thick, so allow at least 25 mm depth behind any 120 mm mounting holes.
Plug the 4-pin connector into a motherboard PWM header; in BIOS enable L.N.C. mode to cap speed at 1500 RPM instead of the 2000 RPM maximum.
The second-generation hydraulic bearing seals lubricant on both sides of the shaft, so no user lubrication is required; replace only if noise exceeds 22.3 dBA or RPM drops below 500.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?