Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green single-sided 288-pin DDR4 DIMM with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 2933MHz Desktop RAM

SKU CH-KPMY-BQZ95

16GB DDR4 2933MHz desktop module runs at 1.2V on a 288-pin DIMM for AMD and Intel systems

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • Tested Frequency2933
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity expands multitasking headroom
  • DDR4 2933 MHz speed accelerates data throughput
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • Replaces Samsung M378A2K43DB1-CVF module directly

16GB DDR4 2933MHz module

This 16GB DDR4 2933MHz (PC4-23400) DIMM is built as a compatible replacement for Samsung M378A2K43DB1-CVF. It targets desktop owners who want a straightforward capacity increase without moving to a newer memory generation. The single 288-pin unbuffered non-ECC stick runs at the standard 1.20V DDR4 voltage.

Check motherboard DDR4 slot and speed support

Verify that your board accepts DDR4 DIMMs at 2933MHz and that the CPU memory controller can run at this data rate. Some platforms default to a lower JEDEC speed unless the BIOS is set to the rated frequency. Confirm the system does not require registered or ECC modules, because this stick is unbuffered non-ECC.

Steady throughput at rated JEDEC settings

The module operates at its tested 2933MHz frequency under continuous load without exceeding the 1.20V specification. Because it uses standard JEDEC timings rather than an XMP profile, sustained bandwidth remains stable during long rendering, compilation or virtualisation sessions. Thermal output stays predictable in a typical desktop airflow environment.

Høydepunkter

  • 16 GB capacity expands multitasking headroom
  • DDR4 2933 MHz speed accelerates data throughput
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • Replaces Samsung M378A2K43DB1-CVF module directly

Spesifikasjoner

BrandA-Tech
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
Tested Frequency2933
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

Spørsmål om denne varen

Does the 16GB DDR4 2933MHz DIMM arrive as a single 288-pin module or do I need to buy a second stick?

The kit contains one 16GB DDR4 2933MHz 288-pin DIMM; no additional module is included.

Should I pick the 1.20V 2933MHz PC4-23400 version or a different speed grade for my desktop?

Choose this 2933MHz PC4-23400 1.20V module if your motherboard specifies DDR4 2933; otherwise select the speed your board lists.

What does the 2933MHz PC4-23400 rating deliver once the stick is installed in a desktop?

It runs at 2933MT/s with a peak bandwidth of PC4-23400, giving the memory controller 16GB of non-ECC unbuffered capacity at standard 1.20V.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.