نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

A-Tech

A-Tech 16GB DDR4 2933MHz Desktop RAM

SKU CH-KPMY-BQZ95

16GB DDR4 2933MHz desktop module runs at 1.2V on a 288-pin DIMM for AMD and Intel systems

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • Tested Frequency2933
  • Voltage1.20V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB capacity expands multitasking headroom
  • DDR4 2933 MHz speed accelerates data throughput
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • Replaces Samsung M378A2K43DB1-CVF module directly

16GB DDR4 2933MHz module

This 16GB DDR4 2933MHz (PC4-23400) DIMM is built as a compatible replacement for Samsung M378A2K43DB1-CVF. It targets desktop owners who want a straightforward capacity increase without moving to a newer memory generation. The single 288-pin unbuffered non-ECC stick runs at the standard 1.20V DDR4 voltage.

Check motherboard DDR4 slot and speed support

Verify that your board accepts DDR4 DIMMs at 2933MHz and that the CPU memory controller can run at this data rate. Some platforms default to a lower JEDEC speed unless the BIOS is set to the rated frequency. Confirm the system does not require registered or ECC modules, because this stick is unbuffered non-ECC.

Steady throughput at rated JEDEC settings

The module operates at its tested 2933MHz frequency under continuous load without exceeding the 1.20V specification. Because it uses standard JEDEC timings rather than an XMP profile, sustained bandwidth remains stable during long rendering, compilation or virtualisation sessions. Thermal output stays predictable in a typical desktop airflow environment.

أبرز المميزات

  • 16 GB capacity expands multitasking headroom
  • DDR4 2933 MHz speed accelerates data throughput
  • 20 V operation reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • Replaces Samsung M378A2K43DB1-CVF module directly

المواصفات

BrandA-Tech
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
Tested Frequency2933
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Recommend UseAMD & Intel Compatible

أسئلة حول هذا المنتج

Does the 16GB DDR4 2933MHz DIMM arrive as a single 288-pin module or do I need to buy a second stick?

The kit contains one 16GB DDR4 2933MHz 288-pin DIMM; no additional module is included.

Should I pick the 1.20V 2933MHz PC4-23400 version or a different speed grade for my desktop?

Choose this 2933MHz PC4-23400 1.20V module if your motherboard specifies DDR4 2933; otherwise select the speed your board lists.

What does the 2933MHz PC4-23400 rating deliver once the stick is installed in a desktop?

It runs at 2933MT/s with a peak bandwidth of PC4-23400, giving the memory controller 16GB of non-ECC unbuffered capacity at standard 1.20V.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.