NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
16GB DDR4 2933MHz desktop module runs at 1.2V on a 288-pin DIMM for AMD and Intel systems
This 16GB DDR4 2933MHz (PC4-23400) DIMM is built as a compatible replacement for Samsung M378A2K43DB1-CVF. It targets desktop owners who want a straightforward capacity increase without moving to a newer memory generation. The single 288-pin unbuffered non-ECC stick runs at the standard 1.20V DDR4 voltage.
Verify that your board accepts DDR4 DIMMs at 2933MHz and that the CPU memory controller can run at this data rate. Some platforms default to a lower JEDEC speed unless the BIOS is set to the rated frequency. Confirm the system does not require registered or ECC modules, because this stick is unbuffered non-ECC.
The module operates at its tested 2933MHz frequency under continuous load without exceeding the 1.20V specification. Because it uses standard JEDEC timings rather than an XMP profile, sustained bandwidth remains stable during long rendering, compilation or virtualisation sessions. Thermal output stays predictable in a typical desktop airflow environment.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| Tested Frequency | 2933 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
The kit contains one 16GB DDR4 2933MHz 288-pin DIMM; no additional module is included.
Choose this 2933MHz PC4-23400 1.20V module if your motherboard specifies DDR4 2933; otherwise select the speed your board lists.
It runs at 2933MT/s with a peak bandwidth of PC4-23400, giving the memory controller 16GB of non-ECC unbuffered capacity at standard 1.20V.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?