Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Aqua duplex fibre cable with FC connectors on both ends, 3.0 mm jacket, twenty metres long

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 20m

SKU CH-NNDD-X93GQ

A 20-metre OM3 duplex multimode patch cable with FC connectors, 3.0 mm jacket and 850 nm wavelength for 10 GbE links

Length 20m

  • Low insertion loss with typical .2 dB and maximum .3 dB
  • High return loss exceeding 38 dB for signal integrity
  • OM3 core supports 10 Gbps multimode transmission
  • 0 mm PVC jacket with 330 mm bend radius
  • Rated for 1000 mating cycles from -20 °C to +60 °C

Cable type and reach

This is a twenty-metre duplex multimode fibre patch cord with FC connectors on both ends. It uses an OM3 core rated for ten-gigabit transmission at eight hundred fifty nanometres. The aqua blue jacket is three millimetres in diameter and made of PVC. It is intended for switch-to-server or data-centre links.

Connector and jacket check

Verify that both ends of your link accept FC connectors and that the equipment supports multimode OM3 at ten gigabits. The cable requires a minimum bend radius of three hundred thirty millimetres, so plan routing with enough clearance. Operating temperature range is minus twenty to plus sixty degrees Celsius.

Build integration

The cord provides a ready-made duplex run without on-site termination. Its ceramic ferrules are rated for one thousand insertion cycles, and typical insertion loss is point two decibels with a maximum of point three decibels. Return loss exceeds thirty-eight decibels. It frees you from fusion splicing while delivering ten-gigabit multimode performance.

Høydepunkter

  • Low insertion loss with typical .2 dB and maximum .3 dB
  • High return loss exceeding 38 dB for signal integrity
  • OM3 core supports 10 Gbps multimode transmission
  • 0 mm PVC jacket with 330 mm bend radius
  • Rated for 1000 mating cycles from -20 °C to +60 °C

Spesifikasjoner

Ingen publiserte spesifikasjoner for denne varen ennå.

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What comes in the box and do I need any extra connectors or tools?

The cable ships ready to use with FC connectors on both ends; no additional adapters or termination tools are required.

How do I decide between OM3 and other multimode grades for my link?

OM3 supports 10 Gbit/s over the full 20 m length at 850 nm, so choose it when your switches or servers run 1 G, 10 G or 40 G short-reach optics.

What does the 0.2 dB typical insertion loss mean for my 20 m run?

At 0.2 dB typical (0.3 dB max) the link loses only a fraction of a decibel, leaving ample margin for 10 Gbit/s transmission over the full distance.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.