Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Aqua duplex fibre cable with FC connectors on both ends, 3.0 mm jacket, twenty metres long

Enfain

Enfain OM3 FC-FC Duplex Multimode Fibre Optic Cable 20m

SKU CH-NNDD-X93GQ

A 20-metre OM3 duplex multimode patch cable with FC connectors, 3.0 mm jacket and 850 nm wavelength for 10 GbE links

Length 20m

  • Low insertion loss with typical .2 dB and maximum .3 dB
  • High return loss exceeding 38 dB for signal integrity
  • OM3 core supports 10 Gbps multimode transmission
  • 0 mm PVC jacket with 330 mm bend radius
  • Rated for 1000 mating cycles from -20 °C to +60 °C

Cable type and reach

This is a twenty-metre duplex multimode fibre patch cord with FC connectors on both ends. It uses an OM3 core rated for ten-gigabit transmission at eight hundred fifty nanometres. The aqua blue jacket is three millimetres in diameter and made of PVC. It is intended for switch-to-server or data-centre links.

Connector and jacket check

Verify that both ends of your link accept FC connectors and that the equipment supports multimode OM3 at ten gigabits. The cable requires a minimum bend radius of three hundred thirty millimetres, so plan routing with enough clearance. Operating temperature range is minus twenty to plus sixty degrees Celsius.

Build integration

The cord provides a ready-made duplex run without on-site termination. Its ceramic ferrules are rated for one thousand insertion cycles, and typical insertion loss is point two decibels with a maximum of point three decibels. Return loss exceeds thirty-eight decibels. It frees you from fusion splicing while delivering ten-gigabit multimode performance.

I korthet

  • Low insertion loss with typical .2 dB and maximum .3 dB
  • High return loss exceeding 38 dB for signal integrity
  • OM3 core supports 10 Gbps multimode transmission
  • 0 mm PVC jacket with 330 mm bend radius
  • Rated for 1000 mating cycles from -20 °C to +60 °C

Specifikationer

Inga publicerade specifikationer för den här produkten än.

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What comes in the box and do I need any extra connectors or tools?

The cable ships ready to use with FC connectors on both ends; no additional adapters or termination tools are required.

How do I decide between OM3 and other multimode grades for my link?

OM3 supports 10 Gbit/s over the full 20 m length at 850 nm, so choose it when your switches or servers run 1 G, 10 G or 40 G short-reach optics.

What does the 0.2 dB typical insertion loss mean for my 20 m run?

At 0.2 dB typical (0.3 dB max) the link loses only a fraction of a decibel, leaving ample margin for 10 Gbit/s transmission over the full distance.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.