Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn

G.SKILL

G.SKILL F5-6000R3036G16GE8-G5N 128GB (8×16GB) DDR5-6000 CL30 ECC Registered server RAM

SKU CH-2P30-S566T MPN F5-6000R3036G16GE8-G5N

Eight 16 GB DDR5-6000 RDIMMs with CL30 timings and ECC registered for AMD Threadripper 7000WX workstations

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-36-36-96
  • Voltage1.40V
  • 128 GB capacity across eight 16 GB modules
  • DDR5-6000 speed with CL30 latency for fast response
  • ECC Registered design protects data integrity
  • AMD EXPO profile enables one-click overclock tuning
  • Tested with AMD Ryzen Threadripper 7000WX on WRX90

G5 Neo 128GB Octa-Channel Kit

This G.SKILL G5 Neo kit provides 128GB across eight 16GB DDR5-6000 RDIMMs. Registered ECC modules target AMD Threadripper 7000WX workstations on WRX90 motherboards with eight-channel support. The CL30 30-36-36-96 timing runs at 1.40V via AMD EXPO profile.

Replacing Slower Registered DDR5

It upgrades from standard-speed registered DDR5 when sustained bandwidth matters for rendering or simulation workloads. The EXPO overclock profile only activates on validated WRX90 boards with capable CPU memory controllers. Systems lacking eight-channel architecture or EXPO support cannot reach the rated 6000 MT/s.

Sustained Load Thermal Behaviour

Without heat spreaders the modules rely on chassis airflow to maintain stability during extended compute sessions. Hand-screened ICs and per-kit validation aim to prevent errors over long runs. Builders needing passive cooling headroom or higher density per slot should evaluate alternative configurations.

Høydepunkter

  • 128 GB capacity across eight 16 GB modules
  • DDR5-6000 speed with CL30 latency for fast response
  • ECC Registered design protects data integrity
  • AMD EXPO profile enables one-click overclock tuning
  • Tested with AMD Ryzen Threadripper 7000WX on WRX90

Spesifikasjoner

BrandG.SKILL
SeriesG5 Neo Series
ModelF5-6000R3036G16GE8-G5N
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-36-36-96
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Multi-channel KitOcta Channel Kit
BIOS/Performance ProfileAMD EXPO
ChipsetAMD WRX90 Chipset
Heat SpreaderNo
FeaturesHigh performance DDR5 R-DIMM memory kit
Designed for use with AMD Ryzen Threadripper 7000WX series processor
Requires compatible AMD WRX90 motherboard w/ 8-channel support
On-die ECC & side-band ECC
Dedicated temperature sensors
AMD EXPO Support
Fraktvekt0.43 kg
Pakkestørrelse248 × 178 × 41 mm

Spørsmål om denne varen

Does the 288-pin DDR5 RDIMM form factor fit a standard AMD WRX90 motherboard slot?

Yes, the 288-pin DDR5 RDIMM design matches the physical slot specification for AMD WRX90 motherboards supporting 8-channel memory architecture.

How do I enable the rated 6000 MT/s speed and CL30-36-36-96 timings on this kit?

Enter the BIOS and activate the AMD EXPO profile; the motherboard and CPU memory controller must support the 1.40V voltage required for the rated frequency.

When should I consider replacing the 16GB modules in this 128GB octa-channel kit?

Replace modules only if memory diagnostics report uncorrectable ECC errors or the system becomes unstable at the EXPO profile despite adequate cooling.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.