BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
G.SKILL
Eight 16 GB DDR5-6000 RDIMMs with CL30 timings and ECC registered for AMD Threadripper 7000WX workstations
This G.SKILL G5 Neo kit provides 128GB across eight 16GB DDR5-6000 RDIMMs. Registered ECC modules target AMD Threadripper 7000WX workstations on WRX90 motherboards with eight-channel support. The CL30 30-36-36-96 timing runs at 1.40V via AMD EXPO profile.
It upgrades from standard-speed registered DDR5 when sustained bandwidth matters for rendering or simulation workloads. The EXPO overclock profile only activates on validated WRX90 boards with capable CPU memory controllers. Systems lacking eight-channel architecture or EXPO support cannot reach the rated 6000 MT/s.
Without heat spreaders the modules rely on chassis airflow to maintain stability during extended compute sessions. Hand-screened ICs and per-kit validation aim to prevent errors over long runs. Builders needing passive cooling headroom or higher density per slot should evaluate alternative configurations.
| Brand | G.SKILL |
|---|---|
| Series | G5 Neo Series |
| Model | F5-6000R3036G16GE8-G5N |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-36-36-96 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Octa Channel Kit |
| BIOS/Performance Profile | AMD EXPO |
| Chipset | AMD WRX90 Chipset |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Designed for use with AMD Ryzen Threadripper 7000WX series processor Requires compatible AMD WRX90 motherboard w/ 8-channel support On-die ECC & side-band ECC Dedicated temperature sensors AMD EXPO Support |
| น้ำหนักในการจัดส่ง | 0.43 kg |
| ขนาดบรรจุภัณฑ์ | 248 × 178 × 41 mm |
Yes, the 288-pin DDR5 RDIMM design matches the physical slot specification for AMD WRX90 motherboards supporting 8-channel memory architecture.
Enter the BIOS and activate the AMD EXPO profile; the motherboard and CPU memory controller must support the 1.40V voltage required for the rated frequency.
Replace modules only if memory diagnostics report uncorrectable ECC errors or the system becomes unstable at the EXPO profile despite adequate cooling.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม