BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278355BTC
I lager
G.SKILL
G.SKILL F5-6000R3036G16GE8-G5N 128GB (8×16GB) DDR5-6000 CL30 ECC Registered server RAM
Eight 16 GB DDR5-6000 RDIMMs with CL30 timings and ECC registered for AMD Threadripper 7000WX workstations
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6000 (PC5 48000)
- CAS LatencyCL30
- Timing30-36-36-96
- Voltage1.40V
- 128 GB capacity across eight 16 GB modules
- DDR5-6000 speed with CL30 latency for fast response
- ECC Registered design protects data integrity
- AMD EXPO profile enables one-click overclock tuning
- Tested with AMD Ryzen Threadripper 7000WX on WRX90
G5 Neo 128GB Octa-Channel Kit
This G.SKILL G5 Neo kit provides 128GB across eight 16GB DDR5-6000 RDIMMs. Registered ECC modules target AMD Threadripper 7000WX workstations on WRX90 motherboards with eight-channel support. The CL30 30-36-36-96 timing runs at 1.40V via AMD EXPO profile.
Replacing Slower Registered DDR5
It upgrades from standard-speed registered DDR5 when sustained bandwidth matters for rendering or simulation workloads. The EXPO overclock profile only activates on validated WRX90 boards with capable CPU memory controllers. Systems lacking eight-channel architecture or EXPO support cannot reach the rated 6000 MT/s.
Sustained Load Thermal Behaviour
Without heat spreaders the modules rely on chassis airflow to maintain stability during extended compute sessions. Hand-screened ICs and per-kit validation aim to prevent errors over long runs. Builders needing passive cooling headroom or higher density per slot should evaluate alternative configurations.
I korthet
- 128 GB capacity across eight 16 GB modules
- DDR5-6000 speed with CL30 latency for fast response
- ECC Registered design protects data integrity
- AMD EXPO profile enables one-click overclock tuning
- Tested with AMD Ryzen Threadripper 7000WX on WRX90
Specifikationer
| Brand | G.SKILL |
|---|---|
| Series | G5 Neo Series |
| Model | F5-6000R3036G16GE8-G5N |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL30 |
| Timing | 30-36-36-96 |
| Voltage | 1.40V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Multi-channel Kit | Octa Channel Kit |
| BIOS/Performance Profile | AMD EXPO |
| Chipset | AMD WRX90 Chipset |
| Heat Spreader | No |
| Features | High performance DDR5 R-DIMM memory kit Designed for use with AMD Ryzen Threadripper 7000WX series processor Requires compatible AMD WRX90 motherboard w/ 8-channel support On-die ECC & side-band ECC Dedicated temperature sensors AMD EXPO Support |
| Fraktvikt | 0.43 kg |
| Paketstorlek | 248 × 178 × 41 mm |
Frågor om den här produkten
Does the 288-pin DDR5 RDIMM form factor fit a standard AMD WRX90 motherboard slot?
Yes, the 288-pin DDR5 RDIMM design matches the physical slot specification for AMD WRX90 motherboards supporting 8-channel memory architecture.
How do I enable the rated 6000 MT/s speed and CL30-36-36-96 timings on this kit?
Enter the BIOS and activate the AMD EXPO profile; the motherboard and CPU memory controller must support the 1.40V voltage required for the rated frequency.
When should I consider replacing the 16GB modules in this 128GB octa-channel kit?
Replace modules only if memory diagnostics report uncorrectable ECC errors or the system becomes unstable at the EXPO profile despite adequate cooling.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
