Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Rectangular development board with 7 inch capacitive touch display and exposed circuit components

LORDWORLD

LORDWORLD ESP32-S3 7 inch 800×480 65K capacitive touch development board

SKU CH-CYG2-B7EWS

A 7-inch capacitive touch screen with 800×480 resolution and 65K colours, driven by an ESP32-S3 dual-core processor at 240 MHz with 2.4 GHz Wi-Fi and Bluetooth 5, plus CAN, RS485, I²C.

  • 7 inch capacitive touch display with 800×480 resolution and 65K colours
  • Xtensa 32‑bit LX7 dual‑core processor running up to 240 MHz
  • 4 GHz Wi‑Fi 802.11 b/g/n and Bluetooth 5 LE with onboard antenna
  • 5‑point capacitive touch via I²C with interrupt support
  • 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM onboard

ESP32-S3 7-inch touch development board

This LORDWORLD board combines an Xtensa 32-bit LX7 dual-core processor running up to 240 MHz with a 7-inch capacitive display at 800×480 resolution and 65K colours. It targets makers and engineers building IoT edge devices that need local graphics, touch input and wireless connectivity in a single module. The board includes 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM for application code and buffers.

Check power and interface needs before ordering

The module communicates over 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE using an onboard antenna. It exposes CAN, RS485 and I2C interfaces plus a micro SD card slot and a full-speed USB serial port for programming and debug. Verify that your host can supply the required voltage and that your enclosure accommodates the exposed connectors and the display bezel.

Sustained load behaviour with flexible clock control

Under continuous operation the dual-core processor can scale its clock and the module power supply can be set independently to reduce draw. The 5-point capacitive touch controller operates over I2C with interrupt support, so the CPU is not polled during idle periods. Large frame buffers in PSRAM and Flash let the graphics pipeline run without frequent memory thrashing during long rendering tasks.

Høydepunkter

  • 7 inch capacitive touch display with 800×480 resolution and 65K colours
  • Xtensa 32‑bit LX7 dual‑core processor running up to 240 MHz
  • 4 GHz Wi‑Fi 802.11 b/g/n and Bluetooth 5 LE with onboard antenna
  • 5‑point capacitive touch via I²C with interrupt support
  • 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM onboard

Spesifikasjoner

BrandLORDWORLD

Spørsmål om denne varen

Does the board ship with a power supply, enclosure or cables, or must they be purchased separately?

The board includes the 7-inch capacitive touch screen, ESP32-S3 module, 8MB Flash, 8MB PSRAM, CAN, RS485, I2C, Micro SD slot and full-speed USB serial port. Power supply, enclosure and extra cables are not included.

Should I choose the 800×480 65K colour version or a different resolution or colour depth?

This model provides an 800×480 panel with 65K colours and 5-point capacitive touch. No alternative resolution or colour-depth option is offered for this board.

What does the 240 MHz dual-core Xtensa LX7 figure mean when the board is running Wi-Fi and touch together?

The 240 MHz dual-core processor handles 2.4 GHz Wi-Fi, Bluetooth 5 LE, 5-point touch interrupts and peripheral I/O simultaneously, with flexible clock and independent power-domain control for low-power operation.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.