暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular development board with 7 inch capacitive touch display and exposed circuit components

LORDWORLD

LORDWORLD ESP32-S3 7 inch 800×480 65K capacitive touch development board

SKU CH-CYG2-B7EWS

A 7-inch capacitive touch screen with 800×480 resolution and 65K colours, driven by an ESP32-S3 dual-core processor at 240 MHz with 2.4 GHz Wi-Fi and Bluetooth 5, plus CAN, RS485, I²C.

  • 7 inch capacitive touch display with 800×480 resolution and 65K colours
  • Xtensa 32‑bit LX7 dual‑core processor running up to 240 MHz
  • 4 GHz Wi‑Fi 802.11 b/g/n and Bluetooth 5 LE with onboard antenna
  • 5‑point capacitive touch via I²C with interrupt support
  • 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM onboard

ESP32-S3 7-inch touch development board

This LORDWORLD board combines an Xtensa 32-bit LX7 dual-core processor running up to 240 MHz with a 7-inch capacitive display at 800×480 resolution and 65K colours. It targets makers and engineers building IoT edge devices that need local graphics, touch input and wireless connectivity in a single module. The board includes 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM for application code and buffers.

Check power and interface needs before ordering

The module communicates over 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE using an onboard antenna. It exposes CAN, RS485 and I2C interfaces plus a micro SD card slot and a full-speed USB serial port for programming and debug. Verify that your host can supply the required voltage and that your enclosure accommodates the exposed connectors and the display bezel.

Sustained load behaviour with flexible clock control

Under continuous operation the dual-core processor can scale its clock and the module power supply can be set independently to reduce draw. The 5-point capacitive touch controller operates over I2C with interrupt support, so the CPU is not polled during idle periods. Large frame buffers in PSRAM and Flash let the graphics pipeline run without frequent memory thrashing during long rendering tasks.

特長

  • 7 inch capacitive touch display with 800×480 resolution and 65K colours
  • Xtensa 32‑bit LX7 dual‑core processor running up to 240 MHz
  • 4 GHz Wi‑Fi 802.11 b/g/n and Bluetooth 5 LE with onboard antenna
  • 5‑point capacitive touch via I²C with interrupt support
  • 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM onboard

仕様

BrandLORDWORLD

この商品に関する質問

Does the board ship with a power supply, enclosure or cables, or must they be purchased separately?

The board includes the 7-inch capacitive touch screen, ESP32-S3 module, 8MB Flash, 8MB PSRAM, CAN, RS485, I2C, Micro SD slot and full-speed USB serial port. Power supply, enclosure and extra cables are not included.

Should I choose the 800×480 65K colour version or a different resolution or colour depth?

This model provides an 800×480 panel with 65K colours and 5-point capacitive touch. No alternative resolution or colour-depth option is offered for this board.

What does the 240 MHz dual-core Xtensa LX7 figure mean when the board is running Wi-Fi and touch together?

The 240 MHz dual-core processor handles 2.4 GHz Wi-Fi, Bluetooth 5 LE, 5-point touch interrupts and peripheral I/O simultaneously, with flexible clock and independent power-domain control for low-power operation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。