Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular development board with 7 inch capacitive touch display and exposed circuit components

LORDWORLD

LORDWORLD ESP32-S3 7 inch 800×480 65K capacitive touch development board

SKU CH-CYG2-B7EWS

A 7-inch capacitive touch screen with 800×480 resolution and 65K colours, driven by an ESP32-S3 dual-core processor at 240 MHz with 2.4 GHz Wi-Fi and Bluetooth 5, plus CAN, RS485, I²C.

  • 7 inch capacitive touch display with 800×480 resolution and 65K colours
  • Xtensa 32‑bit LX7 dual‑core processor running up to 240 MHz
  • 4 GHz Wi‑Fi 802.11 b/g/n and Bluetooth 5 LE with onboard antenna
  • 5‑point capacitive touch via I²C with interrupt support
  • 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM onboard

ESP32-S3 7-inch touch development board

This LORDWORLD board combines an Xtensa 32-bit LX7 dual-core processor running up to 240 MHz with a 7-inch capacitive display at 800×480 resolution and 65K colours. It targets makers and engineers building IoT edge devices that need local graphics, touch input and wireless connectivity in a single module. The board includes 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM for application code and buffers.

Check power and interface needs before ordering

The module communicates over 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 LE using an onboard antenna. It exposes CAN, RS485 and I2C interfaces plus a micro SD card slot and a full-speed USB serial port for programming and debug. Verify that your host can supply the required voltage and that your enclosure accommodates the exposed connectors and the display bezel.

Sustained load behaviour with flexible clock control

Under continuous operation the dual-core processor can scale its clock and the module power supply can be set independently to reduce draw. The 5-point capacitive touch controller operates over I2C with interrupt support, so the CPU is not polled during idle periods. Large frame buffers in PSRAM and Flash let the graphics pipeline run without frequent memory thrashing during long rendering tasks.

Kohokohdat

  • 7 inch capacitive touch display with 800×480 resolution and 65K colours
  • Xtensa 32‑bit LX7 dual‑core processor running up to 240 MHz
  • 4 GHz Wi‑Fi 802.11 b/g/n and Bluetooth 5 LE with onboard antenna
  • 5‑point capacitive touch via I²C with interrupt support
  • 512 KB SRAM, 384 KB ROM, 8 MB Flash and 8 MB PSRAM onboard

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

Does the board ship with a power supply, enclosure or cables, or must they be purchased separately?

The board includes the 7-inch capacitive touch screen, ESP32-S3 module, 8MB Flash, 8MB PSRAM, CAN, RS485, I2C, Micro SD slot and full-speed USB serial port. Power supply, enclosure and extra cables are not included.

Should I choose the 800×480 65K colour version or a different resolution or colour depth?

This model provides an 800×480 panel with 65K colours and 5-point capacitive touch. No alternative resolution or colour-depth option is offered for this board.

What does the 240 MHz dual-core Xtensa LX7 figure mean when the board is running Wi-Fi and touch together?

The 240 MHz dual-core processor handles 2.4 GHz Wi-Fi, Bluetooth 5 LE, 5-point touch interrupts and peripheral I/O simultaneously, with flexible clock and independent power-domain control for low-power operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.