Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

NEMIX RAM

NEMIX RAM 8GB DDR3 1866 CL13 1.35V 204-Pin SODIMM memory upgrade

SKU CH-PSXC-AGGQZ

8 GB DDR3 1866 SODIMM running at 1.35 V with CL13 latency for Supermicro workstations

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 8 GB capacity doubles usable memory for multitasking
  • DDR3 1866 MT/s speed feeds data faster to the CPU
  • Low 1.35 V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible Supermicro workstations
  • CL13 latency keeps response tight under load

System-specific DDR3 SODIMM

This NEMIX RAM module is an 8GB DDR3 1866 CL13 SODIMM built for Supermicro workstations. It runs at 1.35V as a 2Rx8 unbuffered non-ECC stick with 204 pins. The part targets IT professionals upgrading compatible Supermicro systems.

Compatibility focus

It suits administrators maintaining Supermicro platforms that accept PC3-14900 unbuffered SODIMMs. It is not for systems requiring ECC or registered modules, nor for boards limited to lower voltage or different pin counts.

Deciding specification

The 204-pin DDR3 SODIMM form factor with 1.35V unbuffered non-ECC operation decides fit. Only Supermicro workstations specifying this exact electrical and physical interface will accept the module.

Høydepunkter

  • 8 GB capacity doubles usable memory for multitasking
  • DDR3 1866 MT/s speed feeds data faster to the CPU
  • Low 1.35 V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible Supermicro workstations
  • CL13 latency keeps response tight under load

Spesifikasjoner

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR3 1866MHZ Non-ECC Unbuffered SODIMM
Part NumberMS14900-828LK1
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSupermicro
CAS LatencyCL13
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1866MHZ PC3-14900 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spørsmål om denne varen

Will the 204-pin SODIMM fit my Supermicro workstation slot?

Yes — this module uses the standard 204-pin DDR3 SODIMM form factor that matches Supermicro workstation memory slots.

Do I need to configure anything in BIOS after inserting the CL13 1.35V stick?

No — the DDR3 1866 PC3-14900 module is unbuffered non-ECC and runs at 1.35 V, so the system detects it automatically.

When should I consider replacing this 8 GB 2Rx8 module?

Replace it only if memory diagnostics report errors or if your workload grows beyond 8 GB capacity.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.