暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

NEMIX RAM

NEMIX RAM 8GB DDR3 1866 CL13 1.35V 204-Pin SODIMM memory upgrade

SKU CH-PSXC-AGGQZ

8 GB DDR3 1866 SODIMM running at 1.35 V with CL13 latency for Supermicro workstations

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 8 GB capacity doubles usable memory for multitasking
  • DDR3 1866 MT/s speed feeds data faster to the CPU
  • Low 1.35 V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible Supermicro workstations
  • CL13 latency keeps response tight under load

System-specific DDR3 SODIMM

This NEMIX RAM module is an 8GB DDR3 1866 CL13 SODIMM built for Supermicro workstations. It runs at 1.35V as a 2Rx8 unbuffered non-ECC stick with 204 pins. The part targets IT professionals upgrading compatible Supermicro systems.

Compatibility focus

It suits administrators maintaining Supermicro platforms that accept PC3-14900 unbuffered SODIMMs. It is not for systems requiring ECC or registered modules, nor for boards limited to lower voltage or different pin counts.

Deciding specification

The 204-pin DDR3 SODIMM form factor with 1.35V unbuffered non-ECC operation decides fit. Only Supermicro workstations specifying this exact electrical and physical interface will accept the module.

特長

  • 8 GB capacity doubles usable memory for multitasking
  • DDR3 1866 MT/s speed feeds data faster to the CPU
  • Low 1.35 V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible Supermicro workstations
  • CL13 latency keeps response tight under load

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR3 1866MHZ Non-ECC Unbuffered SODIMM
Part NumberMS14900-828LK1
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSupermicro
CAS LatencyCL13
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1866MHZ PC3-14900 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Will the 204-pin SODIMM fit my Supermicro workstation slot?

Yes — this module uses the standard 204-pin DDR3 SODIMM form factor that matches Supermicro workstation memory slots.

Do I need to configure anything in BIOS after inserting the CL13 1.35V stick?

No — the DDR3 1866 PC3-14900 module is unbuffered non-ECC and runs at 1.35 V, so the system detects it automatically.

When should I consider replacing this 8 GB 2Rx8 module?

Replace it only if memory diagnostics report errors or if your workload grows beyond 8 GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。