Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular circuit board with gold edge contacts and black memory chips on both sides

NEMIX RAM

NEMIX RAM 8GB DDR3 1866 CL13 1.35V 204-Pin SODIMM memory upgrade

SKU CH-PSXC-AGGQZ

8 GB DDR3 1866 SODIMM running at 1.35 V with CL13 latency for Supermicro workstations

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • 8 GB capacity doubles usable memory for multitasking
  • DDR3 1866 MT/s speed feeds data faster to the CPU
  • Low 1.35 V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible Supermicro workstations
  • CL13 latency keeps response tight under load

System-specific DDR3 SODIMM

This NEMIX RAM module is an 8GB DDR3 1866 CL13 SODIMM built for Supermicro workstations. It runs at 1.35V as a 2Rx8 unbuffered non-ECC stick with 204 pins. The part targets IT professionals upgrading compatible Supermicro systems.

Compatibility focus

It suits administrators maintaining Supermicro platforms that accept PC3-14900 unbuffered SODIMMs. It is not for systems requiring ECC or registered modules, nor for boards limited to lower voltage or different pin counts.

Deciding specification

The 204-pin DDR3 SODIMM form factor with 1.35V unbuffered non-ECC operation decides fit. Only Supermicro workstations specifying this exact electrical and physical interface will accept the module.

Puncte forte

  • 8 GB capacity doubles usable memory for multitasking
  • DDR3 1866 MT/s speed feeds data faster to the CPU
  • Low 1.35 V operation reduces power draw and heat
  • 204-pin SODIMM form factor fits compatible Supermicro workstations
  • CL13 latency keeps response tight under load

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR3 1866MHZ Non-ECC Unbuffered SODIMM
Part NumberMS14900-828LK1
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSupermicro
CAS LatencyCL13
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1866MHZ PC3-14900 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Will the 204-pin SODIMM fit my Supermicro workstation slot?

Yes — this module uses the standard 204-pin DDR3 SODIMM form factor that matches Supermicro workstation memory slots.

Do I need to configure anything in BIOS after inserting the CL13 1.35V stick?

No — the DDR3 1866 PC3-14900 module is unbuffered non-ECC and runs at 1.35 V, so the system detects it automatically.

When should I consider replacing this 8 GB 2Rx8 module?

Replace it only if memory diagnostics report errors or if your workload grows beyond 8 GB capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.