Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Two black 240-pin DDR3 desktop DIMMs without heat spreaders

OWC

OWC 8GB (2x4GB) DDR3 1600 CL11 1.5V Desktop RAM

SKU CH-A99V-MGSXG

An 8 GB dual-channel DDR3 kit running at 1600 MHz with CL11 latency and 1.5 V operation for desktop upgrades

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • Dual-channel kit doubles bandwidth with two matched 4GB modules
  • JEDEC-standard DDR3 1600 CL11 runs at stock voltage for broad compatibility
  • 5 V operation keeps power draw low on older desktop platforms
  • Unbuffered non-ECC design installs in standard 240-pin DIMM slots without configuration
  • 8 GB total capacity lets you open more apps and larger files simultaneously

OWC DDR3 1600 dual-channel kit

This kit provides eight gigabytes of DDR3 memory split across two four-gigabyte modules running at 1600 MT/s with CL11 latency at 1.5 volts. It is built for desktop and workstation boards that accept 240-pin unbuffered non-ECC DIMMs.

Sustained-load behaviour

JEDEC-standard timings and voltage keep the modules stable during long rendering, compilation or virtual-machine sessions without throttling. The dual-channel layout doubles peak bandwidth over a single stick, so throughput stays consistent when all slots are populated.

Installation notes

Align the notch on each 240-pin DIMM with the motherboard key and press firmly until the retention clips click; no heat spreader means low-profile coolers clear the modules easily. The most common issue is mixing these sticks with faster or lower-latency kits, which forces the board to run at the slowest common settings.

Høydepunkter

  • Dual-channel kit doubles bandwidth with two matched 4GB modules
  • JEDEC-standard DDR3 1600 CL11 runs at stock voltage for broad compatibility
  • 5 V operation keeps power draw low on older desktop platforms
  • Unbuffered non-ECC design installs in standard 240-pin DIMM slots without configuration
  • 8 GB total capacity lets you open more apps and larger files simultaneously

Spesifikasjoner

BrandOWC
Part Number1U6D32R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Will this kit work in a desktop that takes 240-pin DDR3 DIMMs?

Yes, the kit uses standard 240-pin unbuffered DDR3 DIMMs rated at 1600 MHz CL11 and 1.5 V, matching the JEDEC PC3-12800 specification for desktop and workstation boards.

Is the memory compatible with a system that only supports non-ECC modules?

The modules are non-ECC, so they will work in any desktop or workstation that requires standard unbuffered DDR3 without error correction.

Can I install these two 4 GB sticks alongside existing DDR3 memory?

You can add the pair to empty slots, but for best stability all installed DIMMs should share the same speed, voltage and timing; mixing different CL values or voltages may force the system to run at the lowest common settings.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.