OWC 1U6T32R804GB 4GB DDR3L 1600 CL11 1.35V desktop RAM
- 4GB
- DDR3L 1600 (PC3L 12…
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
OWC
An 8 GB dual-channel DDR3 kit running at 1600 MHz with CL11 latency and 1.5 V operation for desktop upgrades
Capacity 8GB (2 x 4GB)
This kit provides eight gigabytes of DDR3 memory split across two four-gigabyte modules running at 1600 MT/s with CL11 latency at 1.5 volts. It is built for desktop and workstation boards that accept 240-pin unbuffered non-ECC DIMMs.
JEDEC-standard timings and voltage keep the modules stable during long rendering, compilation or virtual-machine sessions without throttling. The dual-channel layout doubles peak bandwidth over a single stick, so throughput stays consistent when all slots are populated.
Align the notch on each 240-pin DIMM with the motherboard key and press firmly until the retention clips click; no heat spreader means low-profile coolers clear the modules easily. The most common issue is mixing these sticks with faster or lower-latency kits, which forces the board to run at the slowest common settings.
| Brand | OWC |
|---|---|
| Part Number | 1U6D32R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Desktops |
| LED Color | None |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Yes, the kit uses standard 240-pin unbuffered DDR3 DIMMs rated at 1600 MHz CL11 and 1.5 V, matching the JEDEC PC3-12800 specification for desktop and workstation boards.
The modules are non-ECC, so they will work in any desktop or workstation that requires standard unbuffered DDR3 without error correction.
You can add the pair to empty slots, but for best stability all installed DIMMs should share the same speed, voltage and timing; mixing different CL values or voltages may force the system to run at the lowest common settings.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?