Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Single green 240-pin DDR3 DIMM with black chips, no heat spreader

OWC

OWC 4GB DDR3 1600 PC3-12800 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM desktop RAM

SKU CH-59PK-P1AJC

A 4 GB DDR3 desktop module with 2Rx8 organisation running at 1600 MHz, CL11 latency and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 4GB

  • Boosts system responsiveness with a 4GB DDR3 1600 module
  • Meets JEDEC and ROHS standards for a warranty-safe upgrade
  • Runs at standard 1.5V for broad desktop compatibility
  • Unbuffered non-ECC design installs easily in 240-pin slots
  • Single 2Rx8 rank simplifies configuration for workstations

4GB DDR3 1600 UDIMM for desktop upgrades

This OWC module provides four gigabytes of DDR3 memory rated at 1600 MT/s with a CAS latency of 11. It uses the standard 240-pin UDIMM form factor and operates at 1.5 volts without ECC or registered buffering. The stick is intended for desktop and workstation systems that accept PC3-12800 memory.

Thermals and power in daily use

Running at the JEDEC-standard 1.5 volts keeps power draw low and heat output modest for a DDR3 DIMM. No heat spreader is fitted, so the bare PCB relies on normal case airflow to stay within safe temperatures. The module produces no audible noise because it has no moving parts.

Build integration and slot considerations

The 240-pin keying matches desktop DDR3 slots, and the unbuffered design works with consumer motherboards that support non-ECC memory. A single 4GB rank leaves additional DIMM slots free for further expansion up to the platform limit. JEDEC and RoHS compliance ensures the module meets industry specifications for a warranty-safe upgrade.

Puncte forte

  • Boosts system responsiveness with a 4GB DDR3 1600 module
  • Meets JEDEC and ROHS standards for a warranty-safe upgrade
  • Runs at standard 1.5V for broad desktop compatibility
  • Unbuffered non-ECC design installs easily in 240-pin slots
  • Single 2Rx8 rank simplifies configuration for workstations

Specificații

BrandOWC
Part Number1U6D32R804GB
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 240-pin DDR3 DIMM and what step is often missed?

Align the notch on the module with the key in the slot, press down firmly until both side clips snap shut, then verify the system reports the full 4GB at 1600MHz in BIOS.

What maintenance or replacement will this 1.5V non-ECC UDIMM need later?

No scheduled maintenance is required; if errors appear, run a memory test and replace the module if it fails, otherwise it runs for the system's life.

What limit appears first when the CL11 2Rx8 module runs under sustained load?

The DDR3 1600 bandwidth ceiling of PC3-12800 is reached before thermal throttling, since the module has no heat spreader and operates at standard JEDEC voltage.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.