Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Black standalone duplicator tower with 23 USB ports and LCD screen

Systor

Systor SYS23EXH 1-23 USB duplicator & sanitizer

SKU CH-KMY1-AXQ6X

Duplicates USB flash drives and portable hard drives to 23 targets at 33 MB/s with LCD control

  • TypeDuplicator: USB flash drive to USB flash drive, USB flash dr
  • Target1 to 23
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+ USB-powe
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Spanish, Portuguese, Japanese

Target Size 1 to 23

Vis 7 flere konfigurasjoner

Overstrøkne versjoner finnes, men er ikke på lager her.

DATA TRANSFER RATE For USB-Powered Portable Hard Drives

  • Standalone operation with no computer required
  • Copies one source to 23 targets simultaneously
  • Bit-by-bit duplication ensures exact data replication
  • Asynchronous mode starts copying immediately on insertion
  • Supports USB 1.1 through USB 3.2 standards

Standalone USB duplicator for 23 targets

The Systor SYS23EXH copies data from a single source drive to up to twenty-three target devices without a host computer. It accepts USB flash drives and USB-powered portable external hard drives as both source and destination media. An integrated LCD screen and controller buttons let operators select functions and monitor progress directly on the unit. The duplicator supports USB 1.1, 2.0, 3.0, 3.1 and 3.2 interfaces for broad device compatibility.

Asynchronous copy workflow with 256 MB buffer

Each target port begins duplication as soon as a blank drive is inserted, so operators do not wait for all slots to be populated before the job starts. The internal 256 MB buffer smooths data flow between the source and multiple targets during simultaneous copy sessions. Bit-by-bit duplication reproduces every sector, including hidden partitions and file-system structures. AC-powered hard drives are not supported, so only USB-powered devices may be used.

Desktop operation on 115 V or 230 V mains

The unit runs from standard 115 V or 230 V AC power with no additional cooling requirements, allowing continuous operation without enforced cool-down periods. Status LEDs on each port give immediate visual confirmation of drive detection and copy state. Data transfer rates reach 33 MB/s, limited by the slowest connected device. The SATA controller inside manages all read and write traffic between ports.

Høydepunkter

  • Standalone operation with no computer required
  • Copies one source to 23 targets simultaneously
  • Bit-by-bit duplication ensures exact data replication
  • Asynchronous mode starts copying immediately on insertion
  • Supports USB 1.1 through USB 3.2 standards

Spesifikasjoner

BrandSystor
ModelSYS23EXH
Part NumberSYS23EXH
TypeDuplicator:
USB flash drive to USB flash drive,
USB flash drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB flash drive
Target1 to 23
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+
USB-powered portable external hard drive
Data Transfer Rate33MB/s
Language SupportEnglish, Spanish, Portuguese,
Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
FeaturesCOMPLETE STANDALONE : No computer or software needed
WARRANTY : 1 year parts, 3 years labor, lifetime technical support
ASYNCHRONOUS MODE : Duplication from master source port to blank target ports starts as soon as a source drive/device is inserted and a target drive/device is plugged into any target port
BIT-BY-BIT DUPLICATION : Performs a bit-by-bit copy from the USB-powered portable external source hard drive or USB flash drive
DUPLICATE USB FLASH DRIVE TO USB FLASH DRIVE : Copy from 1 single USB flash drive to USB flash drive(s)
DUPLICATE USB FLASH DRIVE TO USB-POWERED EXTERNAL
Power Supply115V or 230V
Package Contentssee pictures for details

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

What is the maximum data transfer rate the duplicator can sustain?

The unit is rated at 33 MB/s; actual throughput depends on the read and write speeds of the source and target drives inserted.

How loud or hot does the duplicator get during continuous operation?

It is built for continuous burning with no cool-down period required, and the asynchronous mode lets each target port start copying as soon as a drive is inserted.

Which drives can I use as source or target without extra hardware?

USB-powered portable external hard drives and USB flash drives from USB 1.1 through USB 3.2 are supported; AC-powered hard drives are not supported.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.