Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Black standalone duplicator tower with 23 USB ports and LCD screen

Systor

Systor SYS23EXH 1-23 USB duplicator & sanitizer

SKU CH-KMY1-AXQ6X

Duplicates USB flash drives and portable hard drives to 23 targets at 33 MB/s with LCD control

  • TypeDuplicator: USB flash drive to USB flash drive, USB flash dr
  • Target1 to 23
  • Buffer Memory256 MB
  • Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+ USB-powe
  • Data Transfer Rate33MB/s
  • Language SupportEnglish, Spanish, Portuguese, Japanese

Target Size 1 to 23

Voir les 7 autres configurations

Les versions barrées existent, mais ne sont pas disponibles ici.

DATA TRANSFER RATE For USB-Powered Portable Hard Drives

  • Standalone operation with no computer required
  • Copies one source to 23 targets simultaneously
  • Bit-by-bit duplication ensures exact data replication
  • Asynchronous mode starts copying immediately on insertion
  • Supports USB 1.1 through USB 3.2 standards

Standalone USB duplicator for 23 targets

The Systor SYS23EXH copies data from a single source drive to up to twenty-three target devices without a host computer. It accepts USB flash drives and USB-powered portable external hard drives as both source and destination media. An integrated LCD screen and controller buttons let operators select functions and monitor progress directly on the unit. The duplicator supports USB 1.1, 2.0, 3.0, 3.1 and 3.2 interfaces for broad device compatibility.

Asynchronous copy workflow with 256 MB buffer

Each target port begins duplication as soon as a blank drive is inserted, so operators do not wait for all slots to be populated before the job starts. The internal 256 MB buffer smooths data flow between the source and multiple targets during simultaneous copy sessions. Bit-by-bit duplication reproduces every sector, including hidden partitions and file-system structures. AC-powered hard drives are not supported, so only USB-powered devices may be used.

Desktop operation on 115 V or 230 V mains

The unit runs from standard 115 V or 230 V AC power with no additional cooling requirements, allowing continuous operation without enforced cool-down periods. Status LEDs on each port give immediate visual confirmation of drive detection and copy state. Data transfer rates reach 33 MB/s, limited by the slowest connected device. The SATA controller inside manages all read and write traffic between ports.

Points forts

  • Standalone operation with no computer required
  • Copies one source to 23 targets simultaneously
  • Bit-by-bit duplication ensures exact data replication
  • Asynchronous mode starts copying immediately on insertion
  • Supports USB 1.1 through USB 3.2 standards

Caractéristiques

BrandSystor
ModelSYS23EXH
Part NumberSYS23EXH
TypeDuplicator:
USB flash drive to USB flash drive,
USB flash drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB-powered portable external hard drive,
USB-powered portable external hard drive to USB flash drive
Target1 to 23
Buffer Memory256 MB
Supported MediaUSB 1.1, USB 2.0, USB 3.0, USB 3.1, USB 3.2, USB 3+
USB-powered portable external hard drive
Data Transfer Rate33MB/s
Language SupportEnglish, Spanish, Portuguese,
Japanese
DisplayLCD Screen
Operating TypeStandalone
Panel ColorBlack
FeaturesCOMPLETE STANDALONE : No computer or software needed
WARRANTY : 1 year parts, 3 years labor, lifetime technical support
ASYNCHRONOUS MODE : Duplication from master source port to blank target ports starts as soon as a source drive/device is inserted and a target drive/device is plugged into any target port
BIT-BY-BIT DUPLICATION : Performs a bit-by-bit copy from the USB-powered portable external source hard drive or USB flash drive
DUPLICATE USB FLASH DRIVE TO USB FLASH DRIVE : Copy from 1 single USB flash drive to USB flash drive(s)
DUPLICATE USB FLASH DRIVE TO USB-POWERED EXTERNAL
Power Supply115V or 230V
Package Contentssee pictures for details

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

What is the maximum data transfer rate the duplicator can sustain?

The unit is rated at 33 MB/s; actual throughput depends on the read and write speeds of the source and target drives inserted.

How loud or hot does the duplicator get during continuous operation?

It is built for continuous burning with no cool-down period required, and the asynchronous mode lets each target port start copying as soon as a drive is inserted.

Which drives can I use as source or target without extra hardware?

USB-powered portable external hard drives and USB flash drives from USB 1.1 through USB 3.2 are supported; AC-powered hard drives are not supported.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.