Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Compact white desktop switch with eight RJ45 ports and one SFP+ uplink

Ubiquiti Networks

Ubiquiti Networks USW-Flex-2.5G-8 8-port 2.5 GbE network switch

SKU CH-ZG7T-7N5Q3 MPN USW-Flex-2.5G-8

A compact Layer 2 switch with eight 2.5 GbE ports, a 10 Gb SFP+ uplink, and USB-C or PoE+ power options for Wi-Fi 6 access points and IoT devices

  • FormatDesktop
  • Network Management TypeManaged
  • Primary Ports9 x RJ45 + 1 x SFP+
  • Primary Port Type(8) 2.5 GbE RJ45 ports
  • MAC Address Table4K
  • VLAN SupportYes

Model Flex 2.5G

Vis 1 flere konfigurasjoner

Overstrøkne versjoner finnes, men er ikke på lager her.

  • Eight 2.5 GbE ports deliver multi-gigabit speeds to every connected device
  • 10 GbE SFP+ uplink provides high-capacity backbone or long-range fibre link
  • USB-C or PoE+ power input lets you deploy the switch without a mains outlet nearby
  • Advanced Layer 2 features including STP, storm control and port isolation secure and optimise traffic
  • Compact 212.9 × 76 × 33.5 mm desktop form factor fits tight cabinets or wall mounts

Compact 2.5 GbE switch for dense multi-gig

The USW-Flex-2.5G-8 is a managed Layer 2 desktop switch with eight 2.5 GbE RJ45 ports and a 10 Gb SFP+ or RJ45 combo uplink. It targets installers who need high-density 2.5 GbE connectivity for Wi-Fi 6 access points, cameras and IoT endpoints in a small footprint.

Sustained throughput and forwarding under load

Non-blocking throughput reaches 30 Gbps with a switching capacity of 60 Gbps and a forwarding rate of 45 Mpps. Layer 2 features such as STP, RSTP, storm control, multicast and broadcast rate limiting, port isolation, mirroring, jumbo frames and loop protection maintain stability during continuous heavy traffic.

Fanless thermals and dual power options

The fanless aluminium enclosure operates silently while dissipating up to 14 W whether powered by the included 5 V 3 A USB-C adapter or a PoE+ source. Its compact 212.9 x 76 x 33.5 mm form factor and 395 g weight allow discreet placement in tight spaces without active cooling noise.

Høydepunkter

  • Eight 2.5 GbE ports deliver multi-gigabit speeds to every connected device
  • 10 GbE SFP+ uplink provides high-capacity backbone or long-range fibre link
  • USB-C or PoE+ power input lets you deploy the switch without a mains outlet nearby
  • Advanced Layer 2 features including STP, storm control and port isolation secure and optimise traffic
  • Compact 212.9 × 76 × 33.5 mm desktop form factor fits tight cabinets or wall mounts

Spesifikasjoner

BrandUbiquiti Networks
ModelFlex 2.5G
Part NumberUSW-Flex-2.5G-8
FormatDesktop
Network Management TypeManaged
Primary Ports9 x RJ45 + 1 x SFP+
Primary Port Type(8) 2.5 GbE RJ45 ports
MAC Address Table4K
VLAN SupportYes
PoEYes
Layer2
Layer 2 FeaturesSTP & RSTP
Egress Rate Limit
Flow Control
Storm Control
Multicast & Broadcast Rate Limiting
Port Isolation
Port Mirroring
Jumbo Frames
Loop Protection
Power(1) USB Type-C, 5V DC, 3A
(1) PoE+
Max Power Consumption14W with PoE input
14W with AC adapter input
Dimensions212.9 x 76 x 33.5 mm
(8.4 x 3 x 1.3")
Weight395 g (0.87 lb)
CertificationCE, FCC, IC
System RequirementUniFi Network: Version 9.0.114 and later
Fraktvekt2.72 kg
Pakkestørrelse254 × 203 × 178 mm

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

How much power and heat does the USW-Flex-2.5G-8 produce when running continuously?

Maximum consumption is 14 W with PoE+ input, and the same 14 W with the USB-C adapter, so heat output stays low in continuous use.

What must I already have to manage and power this switch?

You need a UniFi Network controller running version 9.0.114 or later, plus either a PoE+ injector or the included 5 V 3 A USB-C adapter.

Will the 2.5 GbE ports and 10 GbE uplink work with my existing 1 GbE cameras and Wi-Fi 6 access points?

Yes, all ports auto-negotiate down to 1 GbE, so legacy devices connect normally while Wi-Fi 6 APs can use the full 2.5 GbE speed.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.