Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 240-pin DDR3 DIMM with black memory chips and gold contacts

A-Tech

A-Tech 4GB 2Rx8 PC3L-12800E DDR3/DDR3L 1600MHz ECC UDIMM 1.35V server RAM

SKU CH-FRY3-STNB8

4GB DDR3L ECC unbuffered DIMM running at 1600MHz with 1.35V low-voltage operation for compatible servers and workstations

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection guards data integrity in servers
  • 35V low voltage cuts power draw
  • 1600MHz DDR3L speed handles heavy workloads
  • 240-pin UDIMM fits compatible server boards
  • Dual-rank 2Rx8 layout maximises 4GB capacity

Server memory module

The A-Tech 4GB DDR3L ECC UDIMM is a 240-pin unbuffered DIMM built for servers and workstations that require error-correcting memory. It operates at 1600 MHz with a CAS latency of 11 and runs at the low 1.35V DDR3L standard while remaining compatible with 1.5V DDR3 slots.

Suited for DDR3 ECC platforms, not for desktops

This module fits systems that specifically support DDR3 ECC unbuffered memory in a 2Rx8 dual-rank configuration. It will not work in desktop or laptop computers that use non-ECC consumer memory, nor in platforms that require registered or load-reduced DIMMs.

1600 MHz DDR3L ECC unbuffered speed grade

The PC3L-12800E rating confirms 1600 MHz operation at 1.35V with ECC enabled on an unbuffered DIMM. Verify that your server or workstation motherboard lists DDR3L 1600 ECC UDIMM support before purchasing, as this speed grade and voltage combination is the deciding factor for compatibility.

Puncte forte

  • ECC protection guards data integrity in servers
  • 35V low voltage cuts power draw
  • 1600MHz DDR3L speed handles heavy workloads
  • 240-pin UDIMM fits compatible server boards
  • Dual-rank 2Rx8 layout maximises 4GB capacity

Specificații

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-12800E
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How can I verify the module is running at the correct 1600 MHz speed and CL11 latency after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1600 MHz with CAS latency 11; the module operates at 1.35 V and can also run at 1.5 V if the platform requires it.

What comes in the package and do I need any extra cables or brackets?

The box contains one 4 GB 2Rx8 PC3L-12800E DDR3/DDR3L 240-pin ECC UDIMM; no cables, brackets or additional hardware are required for installation.

Should I choose the 1.35 V low-voltage version or a standard 1.5 V DDR3 module for my server?

This module is dual-voltage rated at 1.35 V and 1.5 V, so it works in systems that require either voltage; select it when your server or workstation specifies DDR3L ECC UDIMM 2Rx8 at 1600 MHz.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.