Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 240-pin DDR3 DIMM with black memory chips and gold contacts

A-Tech

A-Tech 4GB 2Rx8 PC3L-12800E DDR3/DDR3L 1600MHz ECC UDIMM 1.35V server RAM

SKU CH-FRY3-STNB8

4GB DDR3L ECC unbuffered DIMM running at 1600MHz with 1.35V low-voltage operation for compatible servers and workstations

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 4GB

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection guards data integrity in servers
  • 35V low voltage cuts power draw
  • 1600MHz DDR3L speed handles heavy workloads
  • 240-pin UDIMM fits compatible server boards
  • Dual-rank 2Rx8 layout maximises 4GB capacity

Server memory module

The A-Tech 4GB DDR3L ECC UDIMM is a 240-pin unbuffered DIMM built for servers and workstations that require error-correcting memory. It operates at 1600 MHz with a CAS latency of 11 and runs at the low 1.35V DDR3L standard while remaining compatible with 1.5V DDR3 slots.

Suited for DDR3 ECC platforms, not for desktops

This module fits systems that specifically support DDR3 ECC unbuffered memory in a 2Rx8 dual-rank configuration. It will not work in desktop or laptop computers that use non-ECC consumer memory, nor in platforms that require registered or load-reduced DIMMs.

1600 MHz DDR3L ECC unbuffered speed grade

The PC3L-12800E rating confirms 1600 MHz operation at 1.35V with ECC enabled on an unbuffered DIMM. Verify that your server or workstation motherboard lists DDR3L 1600 ECC UDIMM support before purchasing, as this speed grade and voltage combination is the deciding factor for compatibility.

Přednosti

  • ECC protection guards data integrity in servers
  • 35V low voltage cuts power draw
  • 1600MHz DDR3L speed handles heavy workloads
  • 240-pin UDIMM fits compatible server boards
  • Dual-rank 2Rx8 layout maximises 4GB capacity

Specifikace

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-12800E
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How can I verify the module is running at the correct 1600 MHz speed and CL11 latency after installation?

Enter the system BIOS or UEFI and confirm the memory frequency reads 1600 MHz with CAS latency 11; the module operates at 1.35 V and can also run at 1.5 V if the platform requires it.

What comes in the package and do I need any extra cables or brackets?

The box contains one 4 GB 2Rx8 PC3L-12800E DDR3/DDR3L 240-pin ECC UDIMM; no cables, brackets or additional hardware are required for installation.

Should I choose the 1.35 V low-voltage version or a standard 1.5 V DDR3 module for my server?

This module is dual-voltage rated at 1.35 V and 1.5 V, so it works in systems that require either voltage; select it when your server or workstation specifies DDR3L ECC UDIMM 2Rx8 at 1600 MHz.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.