Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 240-pin DDR3 RDIMM module with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-X139-3G1CG

4GB DDR3 1333MHz ECC registered server memory module with CL9 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

4GB DDR3 ECC RDIMM for servers

This 4GB DDR3 ECC registered DIMM runs at 1333 MHz with CL9 latency at 1.50V. It targets administrators maintaining DDR3-era servers or workstations that require registered, error-correcting memory. The single 240-pin module uses a 2Rx8 organisation and major-brand chips.

Fits registered DDR3 slots in compatible systems

The module installs in 240-pin DDR3 DIMM sockets that support registered ECC operation at PC3-10600 speed. It requires a platform that accepts registered memory and will not function in consumer boards limited to unbuffered DIMMs. Verify your system's qualified vendor list before installation.

Replaces specific Kingston part numbers

This unit serves as a direct equivalent for Kingston KVR1333D3D8R9S/4G, KTM-SX313L8/4G and KVR13R9D8/4I. The cross-reference simplifies sourcing when those exact part numbers are specified in maintenance documentation or vendor-qualified configurations.

Puncte forte

  • 4GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

Specificații

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Întrebări despre acest articol

Will the 1.5 V requirement stay within my server's power budget under sustained load?

The module runs at the standard DDR3 1.50 V, so power draw is predictable and matches typical server DIMM specifications.

Does the registered ECC design add noticeable heat or fan noise during all-day operation?

Registered ECC DIMMs run at the same 1.50 V as standard DDR3 and do not generate extra heat or noise beyond normal server memory.

My motherboard has 240-pin DDR3 slots — is that the only requirement for this module to work?

Yes, it fits 240-pin DDR3 slots, but the board must also support ECC registered (RDIMM) memory and 2Rx8 organisation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.