Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 RDIMM module with black memory chips and gold contacts

A-Tech

A-Tech 4GB DDR3 1333MHz ECC RDIMM 2Rx8 Server Memory

SKU CH-X139-3G1CG

4GB DDR3 1333MHz ECC registered server memory module with CL9 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 4GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

4GB DDR3 ECC RDIMM for servers

This 4GB DDR3 ECC registered DIMM runs at 1333 MHz with CL9 latency at 1.50V. It targets administrators maintaining DDR3-era servers or workstations that require registered, error-correcting memory. The single 240-pin module uses a 2Rx8 organisation and major-brand chips.

Fits registered DDR3 slots in compatible systems

The module installs in 240-pin DDR3 DIMM sockets that support registered ECC operation at PC3-10600 speed. It requires a platform that accepts registered memory and will not function in consumer boards limited to unbuffered DIMMs. Verify your system's qualified vendor list before installation.

Replaces specific Kingston part numbers

This unit serves as a direct equivalent for Kingston KVR1333D3D8R9S/4G, KTM-SX313L8/4G and KVR13R9D8/4I. The cross-reference simplifies sourcing when those exact part numbers are specified in maintenance documentation or vendor-qualified configurations.

Pluspunten

  • 4GB capacity expands server memory for heavier workloads
  • DDR3 1333MHz PC3-10600 speed matches system bus timing
  • ECC registered design detects and corrects data errors
  • 240-pin DIMM form factor fits standard DDR3 server slots
  • 50V standard voltage ensures compatibility with DDR3 platforms

Specificaties

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Will the 1.5 V requirement stay within my server's power budget under sustained load?

The module runs at the standard DDR3 1.50 V, so power draw is predictable and matches typical server DIMM specifications.

Does the registered ECC design add noticeable heat or fan noise during all-day operation?

Registered ECC DIMMs run at the same 1.50 V as standard DDR3 and do not generate extra heat or noise beyond normal server memory.

My motherboard has 240-pin DDR3 slots — is that the only requirement for this module to work?

Yes, it fits 240-pin DDR3 slots, but the board must also support ECC registered (RDIMM) memory and 2Rx8 organisation.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.